What size lock can bolt cutters cut?

What size of bolt cutters should you use to cut a padlock? A set of 24-inch bolt cutters can cut metal up to 7/16-inch in diameter, which will cut the bolts on most standard padlocks. For higher-quality padlocks that use a harder metal, use a 36-inch bolt cutter.

Can 14 bolt cutters cut a lock?

Tolsen industrial 14 inch bolt cutter is ideal tool for cutting rods, rivets, locks and chains.

What can 18 inch bolt cutters cut?

The Hyper Tough 18 inch Bolt Cutter are the perfect tool for your cutting needs. These cutters are ideal for cutting chain, padlocks, bolts, and wire mesh.

What sizes do bolt cutters come in?

Bolt cutters are usually available in 12, 14, 18, 24, 30, 36 and 42 inches (30.5, 35.6, 46, 61, 76, 91.4 and 107 cm) in length. The length is measured from the tip of the jaw to the end of the handle.

Can you cut a hardened lock with bolt cutters?

Yes, bolt cutters are an effective tool you can use to cut off a lock. Choose a pair of long-handled bolt cutters and place the shackle between the blades. Squeeze the grips of the bolt cutters together until they cut through the shackle. Then, simply remove the lock.

Can I cut rebar with bolt cutters?

– Bolt Cutters Don’t underestimate the power of a bolt cutter; of course, you can use these devices to remove padlocks and chains, but they are also effective at snapping rebar. The cutting force alone is enough to chop through smaller diameters of reinforced steel. The caveat is the cleanliness of the cut.

Can bolt cutters break lock?

Can you cut padlock with bolt cutters?

Bolt cutters are the common tool of choice for to cut padlocks during forcible-entry. When a padlock fails or fractures, it usually does so at the latch cut on the shackle, or at the base of the shackle where it swivels down inside.

Will bolt cutters remove a padlock?

How big of a bolt cutter do I need to cut a padlock?

A typical 24 inch bolt cutter has a jaw capacity of 5/16 inch and this should suffice for a standard padlock. To be on the safe side, consider the 24-36 inch range of bolt cutters. Also, what’s the best tool for cutting off a padlock? Bolt cutters are one of the most effective and popular ways to cut through a lock.

What’s the best way to cut a lock?

Bolt cutters are one of the most effective and popular ways to cut through a lock. Essentially, bolt cutters are just a bit pair of scissors that are equipped with a fulcrum joint which allows them to transfer much more power to the blades, allowing you to cut through thick metals.

How is the length of a lock measured?

The shackle length is measured from the top of the lock body to the inside of the shackle. The standard length varies by product and the optional lengths are designated in the product number: ie 3LF. Some common lengths and designations are: LS: 3/4″ (19mm)

How are shackles measured on a Master Lock?

Optional Shackle Lengths. Many Master Lock padlocks are available with extra long or short shackles to provide sufficient reach to lock around the application. The shackle length is measured from the top of the lock body to the inside of the shackle. The standard length varies by product and the optional lengths are designated in…