What is HC-06?
What is HC-06?
The HC-06 bluetooth module is a slave bluetooth module designed for wireless serial communication. It is a slave module meaning that it can receive serial data when serial data is sent out from a master bluetooth device(device able to send serial data through the air: smart phones, PC).
What is the difference between HC-05 and HC-06?
The HC-05 can be a master or slave. The HC-06 is a slave only. This means the HC-05 can initiate a connection to another device and the HC-06 can only accept a connection from another device.
How does Bluetooth module HC-05 work?
HC-05 Bluetooth module provides switching mode between master and slave mode which means it able to use neither receiving nor transmitting data. TXD UART_TXD, Bluetooth serial signal sending PIN Connect with the MCU’s (Microcontroller and etc) RXD PIN.
Is hc06 a ble?
HC-06 or HC-05 bluetooth module does not support BLE(Bluetooth Low Energy) communication. Android BLE blocks support only BLE communication. If you want to send the sensor data from Arduino, you can use wifi shield or ESP8266 and send the data to Android.
Can HC-06 send data?
HC-06 works on serial communication. The Android app is designed to send serial data to the Arduino Bluetooth module when a button is pressed on the app. You can open the serial monitor and watch the received data while connecting.
How do I connect to HC-06?
The first thing to do is to power on the Bluetooth module and see if you can connect to it. For this you need an Android device. With the Bluetooth module powered and the LED(s) blinking, on the Android device go to Settings => Connections => Bluetooth and scan for Bluetooth devices. Here the phone has found the HC-06.
How do I connect to my HC-06?
If you have an Android device, such as phone or tablet, go to PlayStore and install ‘Bluetooth Terminal’ app from Qwerty. Make sure you have turned on Bluetooth on your device. Open the menu icon on the top right corner of the screen and tap on ‘Connect a device – secure’.
How do I pair my HC-06?
Once the module is configured as you wish, you can pair the module HC-06 to the device of your choice like any Bluetooth device. Select the name of your module in the list of available Bluetooth device (default is HC-06) and enter the PIN code (default is 1234). When it is done, The LED should stop blinking.
How do I connect to HC-05?
Android App interfacing with HC-05
- Create an empty project on Android Studio.
- Create a ListView containing all the available bluetooth devices.
- Get the name and MAC-address of HC-05 module.
- Open connection with HC-05 module.
- Instruct the module with data as bytes.
How many pins HC-05 Bluetooth module can remain unconnected?
HC05 PIN DESCRIPTION The HC-05 Bluetooth Module has 6 pins commonly used.
How do I connect my HC-06 to my phone?
