How do I fix the error lights on my Lexmark e260dn?

Following a common error light sequence, press and release the button to resume printing. Press and release the button to cancel the job that is currently printing. Press and hold the button until all of the lights flash briefly to reset the printer.

How do I fix error 1203 on my Lexmark printer?

How to Fix Error 1203 on Lexmark Printer?

1. While the printer is on, remove the cartridge.
2. Turn the printer off.
3. Turn it on.
4. How to do the correct re-installation of the cartridges?
5. Check the operator panel whether it is still displaying error 1203.
6. Check the operator panel again.

How do you fix printer in error state?

If your printer’s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the paper isn’t jammed.

How do I reset printer in error state?

Sometimes, simply restarting both your computer and printer can be the solution to the “printer in error state” issue. Power off your printer and computer completely, leaving them in this state for a few minutes, then turn them on again to see if the problem is gone.

How do I reset my Lexmark ms310dn to factory settings?

From the home screen, touch Settings > Device > Restore Factory Defaults > Restore Settings > Restore all settings > RESTORE > Start. For more information, see Erasing printer memory.

How do you fix a paper jam on a Lexmark printer?

The paper jam is located either at the Front door or in Tray 1.

1. Pull Tray 1 out or open the affected paper tray (could be any input source).
2. Firmly grasp the jammed paper and gently pull it out.
3. Remove all the paper/print media from all the trays.
4. Push Tray 1 or the affected paper tray back in.

Why is my printer in error state?

How to contact Lexmark technical support for service?

When calling Lexmark Technical Support for service, please be prepared to describe the problem you are experiencing or the error message on the display. You will also need to provide your printer’s model type and serial number. This information can be found on a label on the inside of the front cover of the printer.

What does a 91X error mean on a Lexmark printer?

A 91x error indicates a problem with the DC motor or the transfer roller. The printer will require service to correct the issue. Please see Additional Assistance below for more information. A 92x error indicates a problem with the fuser unit or the toner sensor.

What does 97X mean on a Lexmark printer?

A 97x error is a Network error. Power off the printer, disconnect all cables, and power the printer on again. If this clears the error, confirm that your network is set up correctly. If this does not clear the error, the printer will require service to correct the issue.