How do I login to my GoFlex Home?

The Log in to your GoFlex Home page will open. Enter the User Name and Password and click Sign In. The Introducing Seagate Share Pro page will open. Read about Share Pro and select Buy Now or select No Thanks.

How do you reset a GoFlex Home?

Power the drive off using the power button on the side of the drive. Wait for the drive to be complete powered off, then wait about 30 seconds. Power the drive back on. Once the WiFi LED is on and solid, the drive should be reset and ready to go.

Can I connect GoFlex Home directly to my computer?

Plus, you can share a printer with every computer in the home by simply connecting it to the USB port on GoFlex Home.

How do I flash my GoFlex Home?

Reflashing Instructions

1. Format a USB key with FAT32.
2. Extract the Zipped files to the USB key at the root level.
3. Gracefully remove the USB key from the PC and insert into the GoFlex Home’s USB connector. (
4. Power off your GoFlex Home, ensure power cord and Ethernet are still connected.

How do I find my Seagate IP address?

Please follow this procedure to find the IP address of your Seagate Central in Windows:

1. Press the Windows key + R.
2. In the Run window, type: cmd.
3. Press Enter.
4. In the command prompt window, type: ping seagate-XXXXXX. (XXXXXX is the last six digits of the MAC on the Seagate Central label)
5. Press Enter.

Can I connect GoFlex home directly to my computer?

How do I reset my Seagate external hard drive to factory settings?

Reset using the button

1. Power down the Seagate Central by unplugging it from power.
2. Wait approximately 15 seconds.
3. Power up the Seagate Central again.
4. Wait for the device to fully boot and show a steady, non-blinking green light. This takes about three to four minutes.
5. Wait until the light becomes solidly illuminated.

What is the default username and password for Seagate Central?

Seagate Default Usernames & Passwords. The default credentials needed to login to your Seagate router. The majority of Seagate routers have a default username of admin, a default password of admin, and the default IP address of 192.168. 1.1.

What happens when you reset the GoFlex home name and password?

Note: After resetting the GoFlex Home the Setup Wizard will attempt to re-activate the GoFlex Home and would prompt for a new GoFlex Home Name and Password. Since the Remote Access Service is no longer available, the device would be unable to authenticate the new Name and Password. Therefore Setup would not be able to complete.

How to access the GoFlex home on your local network?

How to access the GoFlex home on your local network: Via Web browser; Open a Browser and type the following in the URL field. http://goflex_home; Login with your Username and Password. To connect via Finder or File Explorer see the article below. Connecting to a Seagate Consumer NAS The following information is very important:

How to login to Seagate GoFlex Home Server?

THe 1TB Seagate asks for authentication, despite the credentials already saved. It should just open right away as the other 3 drives do. When I enter my PW, I get refused. – I know my login UNAME and PWORD. – I can access the server from the static IP I set.

What to know about GoFlex home and the discontinuation of?

Only the remote access feature will be discontinued. Once the service has been shut down there are a few important things you need to know. Login with your Username and Password. Choose Preferences.