How much does it cost to mount a mailbox?

The average cost to replace a mailbox and post is about $125 when you do the work yourself. If you hire a handyman for installation, expect an average cost closer to $285.

How do you mount mailbox to pole?

1. Step 1: Dig Hole For Post. USPS mandates that a pole-mounted mailbox be no taller than 45 inches above street level.
2. Step 2: Secure Mailbox Post. Using support beams or a helper, prop the post to make sure that it remains straight while concrete is poured.
3. Step 3: Attach Mailbox.
4. Step 4: Finishing Touches.

How many bags of concrete do I need for a mailbox post?

Pour dry concrete mix into the hole. Most mailbox post installations require a 60 lb. bag of dry concrete.

How long does it take to install a mailbox post?

Installing a new mailbox is a simple project that can be completed in just one day.

Can I move my mailbox from the street to the house?

The USPS does not legislate the relocation of residential mailboxes nationally. Rather, they allow local postmasters to decide what is best for their geographic location and mail service. It can save you a lot of headache if you take the time to call or visit the post office before moving your house mailbox.

How deep do you set a mailbox post?

Installing the Mailbox Post

1. A 4″ x 4″ wooden support or a 2″-diameter standard steel or aluminum pipe.
2. Avoid unyielding and potentially dangerous supports, like heavy metal pipes, concrete posts, and farm equipment (e.g., milk cans filled with concrete).
3. Bury your post no more than 24″ deep.

How do you attach a mailbox to post?

Attaching the Mailbox to the Post. There are hole-drilled attachment flanges every few inches around the bottom of commercially made mailboxes. Don’t try to nail the box directly to the post. Instead, cut a board to fit into the skirt, fasten the board securely to the post, and then nail the box to the board.

How should I install the post for a mailbox?

Position Your Mailbox Position the center of the mailbox over the metal pole.

Position The Brackets Position the brackets on the mailbox and metal post as desired. Note: Each mailbox is slightly different and will come with different instructions.

Secure Your Brackets And Mailbox

How high should a post Mount mailbox be?

The typical post mount mailbox height is normally between 40” to 44”above the ground. The typical mailbox setback is normally between 6” to 8” from the curb. Be sure to contact your local post office as mailbox placement regulations do vary throughout the United States.

How do you attach a mailbox to a wooden post?

Drive a 3-inch wood screw through the mitered board and into the mailbox post. Mount your two mailboxes by sitting them on top of the support frame, facing the road. Screw or nail each box to the horizontal 4-inch board faces, placing the fasteners in the box’s mounting holes.