What is the safe distance from a forklift?

The safe traveling distance between forklifts is approximately three truck lengths, or about a time-lapse of three seconds when passing the same point. More specifically, it’s about 20 feet between forklifts.

What is safe weight for a FLT?

As a general rule, load center is 24″ from the face of the forks (the center point of standard 48” x 48” pallet). Forklift capacities range from about 3,000 lbs up to more than 70,000+ lbs. You can find the rated capacity of a forklift on its data plate.

How do you safely park and shut down a forklift?

SHUT DOWN PROCEDURES – YOU MUST:

1. Return your forklift to the proper area.
2. Put the directional lever in neutral.
3. Set the parking brake.
4. Completely lower the forks.
5. Put the mast in full vertical position.
6. Turn off the forklift.
7. Take the key and return it to its proper place.

When should you drive backwards on a forklift?

If a load on the forks blocks your view of the intended path of travel, travel in reverse. Always maintain a safe distance from the forklift ahead of you (about three truck lengths)

How do I choose a forklift?

When choosing a forklift, the main criteria to consider are the carrying capacity, lifting height, type of motor, tire composition and operator ergonomics. There are several types of motor available: electric motors. combustion engine: gasoline; diesel; LPG (liquid petroleum gas); CNG (compressed natural gas);

What is rated capacity on a forklift?

A forklift’s rated load capacity is the maximum weight in kilograms that a forklift can safely lift and transport at a specified load centre distance in millimetres. This rated load capacity is listed on the forklifts name plate or load capacity data plate.

Is it illegal to leave keys in a forklift?

You might not be aware but it is actually illegal to leave the keys in an unattended Forklift. This measure is to prevent unauthorised use of the Forklift. All forklifts and plant equipment can be fitted with low cost Driver Identification systems which prevent unauthorised usage.

What is the largest cause of fatal or serious forklift accidents?

Forklift overturns are the leading cause of fatalities involving lift trucks. Overturns can be caused by: Improper turning. Driving with an elevated load.

What are the 10 rules for forklift safety?

The following is a transcript of the 10 Rules for Forklift Safety Infographic: For all their benefits, forklifts and powered industrial trucks bring with them numerous hazards that endanger both pedestrians and drivers. While they move heavy loads and increase efficiency, forklifts can also cause serious injuries when they are used unsafely.

Which is the best forklift safety training kit?

Furthermore, this easy-to-use forklift training kit is nationally recognized by major corporations that demand the very best in education materials. Our complete Forklift Safety Kit includes a training manual, video and information cards that makes it easy for you to train and OSHA certify your employees to operate the truck.

Is it safe to carry a heavy load on a forklift?

Carry Your Load Low In general, if the load is too high, it will wobble more, which is more risky to the packages, the driver’s safety, and the safety of those nearby. In fact, a load too high and too heavy could flip a forklift. Keep the load low.

How often does a forklift accident occur in the US?

The Occupational Health and Safety Administration ( OSHA) estimates that forklift accidents cause roughly 34,900 serious injuries and 85 fatal accidents every year.