How do I Unjam My Brother HL 2270dw?

Clear paper jams.

1. Open the front cover and leave the machine for at least 10 minutes to cool down.
2. Slowly take out the drum unit and toner cartridge assembly.
3. Close the front cover.
4. Pull the paper tray completely out of the machine.
5. Use both hands to slowly pull out the jammed paper.

How do you fix a rear paper jam?

Remove the two-sided printing accessory to clear the paper jam

1. Press both RELEASE buttons on either end of the module at the same time and remove it.
2. Remove the panel and carefully pull out the jammed paper.
3. Locate and clear away any small bits of paper that remain.
4. Push the module back on and snap it into place.

Why does my Brother printer keep jamming?

You may be putting too much paper into the paper tray. It should never be overfilled as it can often cause a jam. Also, make sure the paper fits the tray and that it’s inserted correctly. Because the wrong size or incorrectly positioned paper can get stuck in the printer.

How do I Unjam My Brother laser printer?

Why does my Brother printer says paper jam when there isn’t one?

The message Paper Jam may appear on the display if the Brother machine is not feeding paper correctly, paper scraps have become stuck in the print head path, the paper is not loaded properly in the paper tray, the jam clear cover located in the back of the machine, is not installed properly or the PE Actuator is …

Why does my printer keep saying paper jam?

Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again. Turn off the printer, and then disconnect the power cord.

What to do if printer keeps jamming?

How to fix a printer paper jam

1. Turn off the printer.
2. Open all the latches to see where the paper is stuck.
3. Check for askew paper and gently pull the sheets to remove them from the printer.
4. Close all the latches and turn the printer back on.
5. If the printer still refuses to print, check again for loose scraps of paper.

Why is my printer constantly jamming?

If your printer keeps jamming, you should know that the most common cause of a jam is misalignment of the paper. Paper needs to load in smoothly, completely flush with the tray. Overfilling the tray is a great way to ensure you will be spending some personal time getting to know the inside of a printer.