How do I know if my refrigerator inlet valve is bad?
How do I know if my refrigerator inlet valve is bad?
The cubes may be small or there may be a solid chunk of ice instead of individual cubes. It’s also possible that the icemaker will stop working. These are all signs of a malfunctioning water valve. The valve is equipped with a screen on its inlet to remove minerals and sediments in the water supply.
How often do water inlet valves go bad?
In most cases, the original valve should last an average of 9 years but some of the earlier part numbers have averaged 5 or 6 years. If and when a valve does go bad there are some obvious signs to look for.
Why is my water not coming out of my fridge?
A buildup in food particles or debris can clog the drain hose, leading to ice buildup and water leaking out of the freezer and fridge. A clogged or frozen water supply can also cause water to leak on the floor and puddle under your fridge. This can also prevent the icemaker and water dispense from working properly.
How do I fix my refrigerator water dispenser not working?
How to Troubleshoot a Faulty Refrigerator Water Dispenser
- Straighten or Replace the Dispenser Tube.
- Clean Out the Water Lines.
- Inspect and/or Change the Water Filter.
- Test the Water Pressure.
- Defrost the Water Line.
- Check the Pressure Switch.
- Inspect for a Faulty Door Switch.
- Replace the Control Board.
What should I test my water inlet valve for?
The exact ohm resistance rating you should test for may be marked on the valve. If the test you conduct with your icemaker water inlet valve does not produce these results, then you should replace the component. For more information about refrigerator icemaker water inlet valves:
How to test a fridge icemaker’s water inlet valve?
Once you have diagnosed the problem we have the OEM replacement water valve that fits your appliance. Before you begin to test your icemaker’s water inlet valve, make sure you disconnect the appliance’s power supply. The easiest way to do this is to unplug the unit from the wall.
How do you remove a water inlet valve from a refrigerator?
You can use a wrench to loosen the flare nut. Your water inlet valve is held in place on your refrigerator by means of a metal bracket. Use a screwdriver or a nutdriver to remove the screw that holds the water valve’s bracket to the refrigerator cabinet. Gently pull the water valve out of the cabinet, and remove the tube from the outlet port.
What should the temp be for a water dispenser?
The freezer temp should be kept from 0 to 10 degrees Fahrenheit. If it is too cold the water line in the door may freeze. If the water dispenser is not working the water pressure from the house might be too low. Water inlet valves require a minimum of 20 psi to function properly.