How do you reset the maintenance required light on a Toyota Tacoma?

How do you reset the maintenance required light on a Toyota Tacoma?

To disable it all You have to do is start with the vehicle off. Press and hold the odometer reset button. Then turn the vehicle on and back off. After You turn it off release the reset button and You can start the vehicle like normal and the maintenance reminder light will be turned off on the dash.

How do you turn off the maintenance required light on a 2015 Toyota Tacoma?

Toyota Tacoma Oil Maintenance Light Reset for Model Years 2005-…

1. With vehicle ignition switched to ON position, make sure odometer is showing “Tripmeter A”, then turn the ignition switch to OFF position.
2. Push and hold the TRIP reset or MODE button.
3. While holding reset button, switch ignition to ON position.

How do I turn off maintenance required light?

How to Reset the Maintenance Required Light?

1. Turn Your Vehicle on.
2. Turn the Vehicle Off and Press the Trip Meter Reset Button.
3. Turn the Vehicle Back on.
4. Keep the Reset Button Pressed.
5. Release the Reset Button.
6. Why Should You Reset the Maintenance Light?
7. Visit a Toyota Service Center Today!

What does the maintenance required light mean on a 2011 Toyota Tacoma?

Toyota Maintenance Required Light: This light comes on to remind you to change your oil. The maintenance-required light is easy to reset. On most Toyotas you simply: Turn the key to the on position.

Why is the maintenance required light on?

The purpose of the maintenance required light is to encourage drivers to take their vehicle in for regular scheduled maintenance, such as oil changes, spark plugs, new tires, etc. Normally, automotive specialists will reset the maintenance required light when servicing your vehicle.

What does the maintenance required light mean on a 2015 Toyota Tacoma?

The Toyota maintenance light can appear on your dashboard as “MAINT REQD”. It’s a light that remains active permanently, letting you know that you need to go for an oil change in a certified auto shop. Changing the oil in your Toyota can improve fuel efficiency and make your vehicle run as smooth as silk.

How do I reset maintenance light?

Turn your vehicle’s ignition to the “acc” setting while holding the button. Do not crank the vehicle. Hold the position for five seconds and turn the ignition key off. Release the button. The maintenance light will be reset and will illuminate again the next time service is due.

How do I reset the maintance light?

Here’s how you do a maintenance light reset: Put your key in the ignition. Turn the key to position one. This is the position just before starting the car. Push the trip meter reset button on the dashboard. Hold it down for a second or two. Continue to hold the odometer button for around ten seconds. The light should flash, beep, and then go out. Once off, release the odometer button. Start your car.

What does the maintenance required light mean?

The maintenance required light just means that some sort of scheduled maintenance needs to be done. Most of the time it just means you need an oil/filter change. Your owner’s manual will list what maintenance is required based on your milage.