Why does TiVo take so long to boot?

I suspect Tivo does this during the boot up process because reboots should be rare. And if the Tivo is rebooting it likely the reboot may have been unexpected. If the reboot was unexpected then the file system could be corrupted.

How do I wake up my TiVo box?

When Wake with TiVo button is set to ON, pressing the TiVo button or the voice button enables the TiVo DVR to wake up from standby, power up the TV (if necessary), switch to the right input, and display the TiVo device as the active source. .

How do you restart a frozen TiVo?

Unplug the network adapter, phone cord, or Ethernet cable from the back of the TiVo device, and then disconnect the power cord. Wait 15 seconds, and then connect the power cord again. You should see the ‘Welcome. Powering up… ‘ screen and your system will restart within a few minutes.

Why is my TiVo not working?

Power cycle your TiVo device, modem and router. Unplug your modem and router then wait 10 seconds and plug them back in. A full restart can take 30-60 seconds. Unplug your TiVo device’s power cord for 20 seconds, then plug it back in.

How do I test my TiVo hard drive?

TiVo’s Hard Drive Test

1. Putting Remote into IR mode.
2. At restart, holding the Pause button when amber light flashes.
3. Pressing the kickstart code (54)
4. Green and amber lights will blink in alternating patterns if code has been accepted.

Why can’t I activate my TiVo?

Restart the TiVo Stream 4K by unplugging and reconnecting the USB power cable after 10 seconds. 4. If you are still unable to activate your TiVo Stream 4K, wait a few minutes and try again later.

How do I activate my TiVo 4K?

When you first install TiVo Stream 4K, you’ll follow on-screen prompts to set up your device. When you come to an activation screen, use a computer or mobile device to open a browser. Go to tivo.com/activate/stream4k, and sign in with your TiVo.com username and password.

Why is my TiVo box not working?

Can I turn my TiVo box off at night?

There’s no problem turning the boxes off if you would rather they not be left on. It’s actually useful to turn them off once a week or so, as if they all have little computers in them which can sometimes mess up.

Why does my TiVo say welcome, powering up?

Some TiVo units are more prone to power supply problems than others, and some of those units will show “Welcome, Powering Up” as a result of a power supply failure. See “Suggested Solutions” to the right. If you recently had a severe electrical storm, thunderstorm or other power surge, then your TiVo problem could be a blown power supply.

Why is my TiVo hard drive not powering up?

Sometimes, fans will spin, but usually hard drives wont power up. There is a known problem with some TCD140060 and TCD130040 TiVo DVRs as they get older.

Why is my TiVo DVR stuck on the Welcome Screen?

In some model TiVos, a failed power supply can cause the DVR to stick on the Welcome, Powering Up screen. When a power supply fails, it can also damage hard drive, so it’s hard to know whether a drive is also bad. If you have one of these TiVo models, we recommend that you consider a replacement power supply as well.

What are the service numbers on a TiVo?

Non-DIRECTV units prone to power supply issues have TiVo Service Numbers beginning with 130, 140, 240 and 648. In addition, all Series 2 DIRECTV TiVo units are also prone to power supply failures.