How do I get more power out of my 350 Vortec?

How to Get More Horsepower Out of My Chevy 350 Small Block

1. Modify your air intake.
2. Modify your exhaust.
3. Change your camshafts and valve train.
4. Purchase new cylinder heads, or have yours ported and polished.
5. Have your motor rebuilt and blueprinted.

How much horsepower can you get out of a Vortec 350?

The ’96-’00 350ci Vortec 5700 engines enjoy lots of aftermarket support to help improve the 255 hp and 330 lb-ft of torque they’re rated for at the crank. An engine swap can be quite costly, so putting even a quarter of those funds into your Vortec 350 engine could get you where you want to be.

How much power can a 5.7 Vortec make?

Performance Specifications The Vortec generated 255 horsepower at 4,600 rpm and 330 foot-pounds of torque at 2,800 rpm, or the force required to move a vehicle forward.

How much horsepower does a 97 Vortec 350?

Vortec Small Block The truck engine was rated at 255 horsepower and 330 foot-pounds of torque.

Is the 350 Vortec a good engine?

The 350 Vortec is a great motor. It’s a shame they only offered it in the trucks for 2.5 years.

What is so special about a Vortec engine?

The redesigned cylinder heads of a Vortec engine provides for improved combustion efficiency. The intake ports (reshaped) of the engine provides for better cylinder filling and fuel atomization by promoting higher air flow velocities to the combustion chambers via the ports.

Is 5.3 or 5.7 engine better?

IMO-The 5.3 is definately a faster motor but the 5.7 seems to handle weight better. My 5.3 averages about 17mpg while and I got about 15mpg with my 5.7. It is hard to get a good comparison though. The 5.7 was a Z71 regular cab, short bed with an auto and 3.73s.

How much horsepower do Vortec heads add?

The original answer was related to modifying the heads to accept more valve lift. Our original answer combined the Chevrolet Hot cam with a set of these Vortec heads. Our estimate then and now is around 350-375 horsepower. Your question relates to porting the Vortec heads to improve the flow, which is a great idea.

How much horsepower will headers add?

In general, a quality set of headers should provide an increase of approximately 10-20 horsepower, and if you’re restrained with your right foot, you may even see an increase in fuel mileage.

What should I do to improve my Chevy 350?

Do the research before you purchase your upgrades. Get headers. The easiest performance enhancer on the Chevy 350 is a new exhaust system because it’s the weak point in the stock setup. The carburetor, manifold and valves are big enough to start with. The performance suffers because of the small exhaust setup.

What’s the compression ratio on a 350ci Vortec?

With a common, four-eyebrow flat top piston and a .041-inch thick head gasket on a 350ci engine, the Vortec head will bump the compression to around 9.5:1 depending upon the deck height. There are other, smaller points that are important to know because they affect cam selection.

How much horsepower does a 350 Chevy have?

The graph shows that a stock two-barrel, 350 Chevy could hardly be considered a power house. The combination of mild cam timing and limited breathing through the two-barrel induction and stock iron heads resulted in peak numbers of just 241 hp and 359 lb-ft of torque.

Can you change the engine on a Chevy 350?

Chevrolet created a strong after-market for the engine by making so many of them and making them easy to work on. Performance enhancing changes are effective, but there is a warning. Any change to the engine may run into local ordinances concerning pollution or noise. Always check first.