How do I log into my Shaw modem?

Open an Internet browser (e.g. Google Chrome) and locate the address bar. In the address bar, type in the following: 192.168. 0.1 and press the enter key on your keyboard. You will be presented with your WiFi modem login page.

Is my Shaw modem also a router?

Your Shaw modem acts as a router for your home, but if you would prefer to use your own third party router, you can.

What is IP passthrough Shaw?

IP Passthrough allows you to assign a public IP address to a device connected to your Cisco modem, effectively bypassing Cisco’s internal router.

How do I change my Shaw router settings?

To change the wireless network name of your Shaw SMC WiFi modem:

1. Enter 192.168. 0.1 in your web browser’s address bar.
2. Log in with the following information: Username: cusadmin.
3. Click Wireless.
4. The field next to Primary SSID is the current name of your wireless network.
5. Click Apply to save changes.

How do I reset my Shaw modem?

Locate the small pin-hole reset button located on the back of the Shaw WiFi Modem. Push and hold this button down for 15 seconds with a paper clip or pen. This will cause the modem lights to begin to flash and after a few moments, the modem will come back online.

Can I replace my Shaw modem?

Do I need to pay to have it replaced? We will replace your modem free of charge. There will be no changes to your regular billing as a result of the swap.

How many IP addresses does Shaw provide?

two IP-addresses
Shaw allows each customer to have two IP-addresses.

What are the benefits of IP passthrough?

The IP Passthrough feature allows a single PC on the LAN to have the Router’s public address assigned to it. It also provides Port Address Translation (PAT)–Network Address Port Translation (NAPT) via the same public IP address for all other hosts on the private LAN subnet.

How do I reset my Shaw modem to factory settings?

How do I log in to my Shaw WiFi modem?

Open an Internet browser (e.g. Google Chrome) and locate the address bar. In the address bar, type in the following: 192.168.0.1 and press the enter key on your keyboard. You will be presented with your WiFi modem login page. Password: This information is located on the white sticker on the top or side of your modem.

Can a Shaw modem pass out static IPs?

The Shaw modem won’t pass out static IPs automatically. You or your IT person will need to manually enter the assigned static IP information into your networking device. Shaw agents will assist with providing the IP address information and verifying the Shaw setup, but not with third party equipment such as routers or firewalls.

Where do I Find my IP address on Shaw?

If you look at the printed label on the Shaw box, there is an ID –> ‘cusadmin’, and a password. With your web-browser, and that ID/password, you can “logon” to the Shaw box, and view the current IP-address, and you can view the current value of the TTL.

What to do if your Shaw IP isn’t working?

If the IP doesn’t start working, remove power and all Ethernet connections to the Shaw modem. After 30 seconds, plug only the power cord back in. After the modem is back online, reconnect all Ethernet connections again.