What is a plank on frame model ship?

“Plank on Frame” means that the planking on the hull is laid across actual frames that are similar to the actual frames of a real ship of this time period.

What is the plank called on a ship?

strake
On a vessel’s hull, a strake is a longitudinal course of planking or plating which runs from the boat’s stempost (at the bows) to the sternpost or transom (at the rear). The word derives from traditional wooden boat building methods, used in both carvel and clinker construction.

What is a stealer plank?

A stealer plank is one that is let into a host plank so that the combined planks can cover more territory. The oversize plank stock was roughly shaped to the curve to fit the ribs and tuck, and clamped on the hull where I marked the high spots in the way of the ribs and scribed the mating edge to the host plank.

What wood is best for model making?

All model-building fans know that balsa wood is an essential material for their craft. Sourced from the eponymous tree, this wood is lightweight, showcases minimal grain, and is favored for its softness—this is the easiest wood to carve and shape.

How do you use a plank bending tool?

The plank blending tool is ideal for bending planking strips to the desired curvature. The rounded head on the tool should be warmed up and the wooden strip should be placed on the wooden template form. The strip is then heated by running the tool head over it a few times until the required curve is achieved.

Did anyone actually walk the plank?

The blindfolded captive, prodded at cutlass-point out onto a narrow beam dangling over the sea, has been as much a part of pirate lore as the buccaneer snarling “Argh!” However, there is no proof that swashbucklers ever made their enemies and victims walk the plank.

What did Pirates do to female prisoners?

What did pirates do with female prisoners? women prisoners were their for the pirates’ pleasure. They would rape and humiliate them, so you were not in good luck if you were a woman prisoner.

What is meant by strake?

Definition of strake 1 : a continuous band of hull planking or plates on a ship also : the width of such a band. 2 : streak, stripe.

What is the difference between basswood and balsa wood?

Balsa and basswood are used to construct model planes. Balsa is so lightweight it is used to construct model airplanes, bridges and buoys; basswood is a preferred material for woodcarvers, as it is fairly inexpensive and easy to carve compared with many other wood varieties. …

What kind of planks to use for model ship?

I also decided to use shorter planks that are at least “close” to scale length. The Model Shipways Fair American kit contains wood strips for planking. It includes basswood strips for planks and a set of thin walnut strips to use as a second layer of planking. Several months ago, my puppy ate all that material.

When do you plank the sides of a boat?

the sides of the hull, the counter at the stern should be planked over first. Seven planks will be needed to cover the upper and lower counter. However you should double check that the height of your two stern ports is correct before you start planking. This will be the last opportunity to ensure they are correctly positioned. Once the counter

Do you need to taper the planks on a ship?

The hull is radically wider in some parts and narrower in others, so planks will need to be tapered. The sharp curves at the bow and stern will require heat-bending the wood.

What’s the first stage of the planking process?

The first stage in planking is the process of lining out. In full size practice this consists of dividing the hull into bands of roughly equal widths using wooden battens. In model work the use of battens is often recommended.