How do you remove a soda fountain head?

Remove the nozzles and diffusers for all valves by turning them counter clockwise and pulling down. Separate each nozzle from its diffuser and rinse all parts with warm water. Soak the nozzles and diffusers in sanitizing solution for 60-90 seconds.

How do you service a soda machine?

Just follow the protocol established by the equipment manufacturer, which The Coca-Cola Company endorses: wash your hands, mix the cleaning solution; remove nozzles and diffusers and soak them in the sanitizing solution; brush nozzles and diffusers and then air dry; wipe down the machine. And you’re done!

How do you troubleshoot a soda machine?

Is your Soda Machine Not Dispensing Syrup?

1. To troubleshoot this problem, you have to check the syrup box. If it is empty, then replace it.
2. Make sure the CO2 gas tank is full and open. Verify pressure.
3. The soda machine should be ON.
4. You need to fill the ice bin if empty, tap down the ice, and close the ice bin door.

How does a soft drink fountain dispenser work?

How Does It Work? In a soda fountain machine, CO2 is dissolved into water by lowering the temperature of the water or increasing the pressure of the CO2 gas using a carbonator. The syrup and carbonated water mix together and exit out of the nozzle, which is activated when the customer pushes down on a lever.

What do you soak soda nozzles in?

To maintain a tidy soda fountain machine, these should also be cleaned daily. Remove and dismantle the nozzles and soak them in hot water.

How often should you clean fountain soda machine?

The U.S. Food and Drug Administration emphasizes cleaning and disinfecting as a main tenant of its COVID-19 best practices guidelines. Bernick recommends that restaurant staff thoroughly clean the entire soda fountain once a day.

What do you soak a soda gun in?

Activate the soda water button for 10 seconds and taste a drink from each beverage. Soak connectors in a dedicated bucket of Kay-5® or chlorine- based sanitizer solution for 1 minute. OK to soak multiple connectors at same time if they are properly labeled.

Why is my Coke machine not working?

Make sure the circuit they are plugged into has power (is there a breaker that has been thrown?) 3. Check if the dispenser has been turned on by the key. If the unit is “coughing” gas and syrup, but no water is coming out, make sure no one has shut off the water supply.

How do you stop a soda machine from leaking?

This can be remedied by adding a sponge to the drip pan to help it hold more fluid, and evaporate. You could also place an inexpensive baking dish or tray below the vending machine to catch any water that may escape.

Does fountain soda use tap water?

Essentially, tap water is used in most soda fountains because it’s the only real choice for business. Soda fountains aren’t designed to dispense high-quality craft soda; they’re designed to give out a lot of regular soda in rapid succession.

Where can I get a soda dispenser installed?

Welcome to Soda Dispenser Depot, your full service soda fountain machine, installation, parts & service company. We carry a full line of parts for a variety of soda dispensers including:

What does soda dispenser depot do for You?

Soda Dispenser Depot performs all levels of service, installation, repair, and remanufacturing of soda fountain equipment. We are one of the largest soda fountain remanufacturing companies that test, repair, assemble, and ship all over the world.

Where can I get a soda fountain installed?

We are one of the largest soda fountain remanufacturing companies that test, repair, assemble, and ship all over the world. Our installation team services Charlotte, NC and the surrounding areas— Contact us to determine if you’re within our service area.

Are there different types of soda fountain dispensers?

We carry 3 different styles of soda fountain dispensers: Just added: Counter Electric and Ice and Beverage systems! We’ve got all the parts and accessories you’ll need to keep your soda fountain performing optimally.