What beer can you use in Krups BeerTender?

Beautifully designed, the KRUPS BeerTender is compatible with the Heineken DraughtKeg system: Heineken, Heineken Premium Light, Newcastle Brown Ale.

How do I open a BeerTender?

Instructions for the BeerTender

1. Place the Krups BeerTender on a level sturdy surface near an electrical outlet.
2. Snap the draught beer tube onto the DraughtKeg of beer.
3. Press the cover release on the front of the BeerTender to open the lid.
4. Turn the tap clockwise and snap it into the BeerTender front.

How long does Krups last?

For how long a time can I keep my beer after opening? Two litre kegs can be kept inside the appliance for 15 days after opening, 4 and 5 litre kegs can be kept for 1 month.

How does Krups BeerTender work?

Krups actually uses air to keep the beer fresh. When it’s time to pour, the tap pushes air into the plastic bottle, this puts pressure on the bag inside, squeezing the beer out through the tap and into your glass.

Can you reuse Beertender tubes?

Answer: I reuse them 2 or 3 times, never had any issue. Carefully remove them with a small knife (gently push inside the holes) and wash them.

Can a keg be tapped twice?

The good news is yes, you can tap a keg twice —with some limitations, of course. In the event that you’re using a manual or O2 pump, you’ll unfortunately only get one tap out of your keg.

How long does it take for Krups to go green?

Once in THE SUB®, cooling down a TORP® takes 10 to 16 hours (depending on starting temperature of the TORP®). When your beer is chilled to the right temperature, then the light on the front of THE SUB® will turn green. To speed up the process, ensure your TORP® is fully chilled before inserting it into the SUB®.

How long do Krups kegs last?

Two litre kegs can be kept inside the appliance for 15 days after opening, 4 and 5 litre kegs can be kept for 1 month.

What beers are available in mini kegs?

Mini Keg Beers for the Mini Kegerator

• Heineken Lager.
• Newcastle Brown Ale.
• Coors Light Lager.
• Paulaner Oktoberfest Marzen Amber.
• DAB Original Lager.
• Widmer Hefeweizen.
• Bell’s Oberon Wheat Ale.
• Rogue Yellow Snow IPA.

What should I do if my Krups BeerTender is not working?

Verify that the Beertender is connected to a working power supply if it is not working at all. The electrical cord should be firmly connected to the unit as well as the electrical socket. Ensure the unit is switched “On” if the Beertender has power but is not dispensing beer.

Is the Krups Beertender compatible with Heineken draughtkeg?

Krups, the world wide leader of small appliances and Heineken, the leader in European Premium Imported Beer have partnered together to create the ultimate beer drinking experience at home. The BeerTender system is compatible with the Heineken DraughtKeg system which utilizes an internal carbonator pressure unit.

Why is my Krups BeerTender full of foam?

• The beer tube is not fully inserted in the keg. • The beer tube is not well placed inside the tap head of the appliance. • The beer tube is pinched. • The keg is empty. Is it normal if the first glass drawn from the keg is full of foam? Yes, the first glass from the keg contains primarily foam that may be discarded.

When did I buy the Krups B90 from Amazon?

Bought the B90 from Amazon in February 2010. Worked fine until a month ago when it just quit. A call to Krups revealed it was made in 2008 and there was nothing they could do; they claimed it was completely uncharacteristic for a failure to occur this quickly, but a little research online indicates I was very lucky to get 2 years out of it.