What is SFS Metsec?

Metsec Steel Framing Solution (SFS) is a fast track steel stud panel framing system which is fixed as infill between the primary structural frame and provides a carrier for insulation, exterior cladding and interior boarding.

Is Metsec fire rated?

Achieving up to 4 hours fire resistance Metsec Z and C-section side rail systems, combined with the appropriate fire resistant wall cladding system, have performed satisfactorily in fire tests up to 4 hours duration.

What does SFS mean in building?

Steel Framing Systems
The use and application of Steel Framing Systems (SFS) has seen a marked rise in modern construction in recent years.

What is Metsec made of?

A Pre-Engineered Framework The frame comprises steel columns and horizontal beams, constructed in the form of a grid, with the purpose of supporting the building to which it is attached. One of the primary objectives of the SFS is to provide early weather protection for the protected structure.

Is Metsec load bearing?

Metsec SFS load bearing is a complete load bearing system suitable for structures up to 5 storeys without the need for a primary hot rolled or reinforced concrete frame.

Is Metsec Galvanised?

Here at voestalpine Metsec plc we developed and now lead the market when it comes to SFS light gauge galvanised steel structural framing systems. Metsec SFS systems are suitable for a wide range of applications in the vast majority of construction sectors.

What is a steel frame system?

Steel frame is a building technique with a “skeleton frame” of vertical steel columns and horizontal I-beams, constructed in a rectangular grid to support the floors, roof and walls of a building which are all attached to the frame. The development of this technique made the construction of the skyscraper possible.

Can a metal stud wall be load bearing?

Heavier gauge metal studs are used in load bearing walls and structural applications such as exterior walls. Framing techniques for metal studs are similar to those of wood construction. Metal studs are available in many of the same basic dimensions as wood studs.

Is steel frame cheaper than wood?

Cost-effective: While never as cheap as wood, steel studs are now only about 30-percent more expensive than wood studs. Lightweight: Steel studs are lighter to carry and store than wood because they are hollow.

What are the two types of structural steel frames?

There are three main types of structural steel framing systems. They are the clear-span rigid frame structure, the modular structural frame and single slope frame style.

What do you need to know about Metsec SFS?

See how Metsec SFS systems will perform in different applications with a full range of insulation and plaster boards. We give you access to a full suite of performance and testing data so you can be confident in your SFS construction.

What kind of insulation is used in Metsec SFS?

Performance data is available with 2 types of insulation, both can be used above 18m, Kingspan K15 and Rockwool Duoslab. Tested both load bearing walls and also non-load bearing for infill solutions which are more economical are available in the Metsec SFS systems.

What can Metsec be used for inside a building?

The most common application for Metsec SFS is infill walling. In this scenario the Metsec is constructed from the floor to soffit of the primary structural frame to ‘infill’ the external wall zone. This option is typically the most economical solution and allows the SFS to be installed from the inside of the building.

How long does a Metsec side rail system last?

Achieving up to 4 hours fire resistance. Metsec Z and C-section side rail systems, combined with the appropriate fire resistant wall cladding system, have performed satisfactorily in fire tests up to 4 hours duration. The period of fire resistance is dependent upon the construction and materials used in the fire wall cladding,…