How do you change the blade on a ridgid reciprocating saw?

Published by Charlie Davidson on

How do you change the blade on a ridgid reciprocating saw?

How Do You Change The Blade On A Ridgid Reciprocating Saw?

  1. Remove the battery pack or power cord.
  2. Rotate the blade clamp counterclockwise and hold to open.
  3. Remove the blade from the saw.
  4. Insert the saw blade until it is fully seated.
  5. Release the blade clamp to secure.

Why is my reciprocating saw not working?

If the saw is not reciprocating as it should be, it may be the gears on the inside of the tool. If the gear has any broken or missing teeth, this can interrupt or stop the reciprocating action all together on the saw. If it is not, you will need to replace the gear on that saw yourself if you are mechanically inclined.

How do you remove a stuck Sawzall blade?

Grasp the blade with a pair of pliers in your free hand. Pull the blade straight out of the Sawzall Hatchet. Jiggle the blade up and down with the pliers if necessary until the blade comes out of the saw. Release the collar once you remove the blade.

How do you clean a Sawzall?

To clean off accumulated dirt and grime on your power tool, most manufacturers recommend a damp rag and a bit of mild soap. Avoid solvents and harsh cleaning chemicals – these can degrade the plastic and rubber parts of your reciprocating saw.

Is a 6 amp reciprocating saw powerful enough?

I used it and a carbide tipped blade to cut thru a 4 inch cement residential sewer line. The ability to rotate the head of the tool made the job much easier. It’s latge but easy enough to handle and 6 amps isore than enough power for use around the house.

Why is my reciprocating saw smoking?

Smoke where there shouldn’t be smoke. What the Tool is Trying to Tell You: The blade needs some work. It’s also possible that the blade is simply dull. If you’re using a jigsaw or a reciprocating saw, it’s easiest to just replace the blade.

What type of blade does a Ryobi reciprocating saw use?

Instructions: If you’re cutting wood, choose a 6-10 TPI blade. For metal, choose a higher TPI such as 18.

Categories: Blog