How do I print a configuration page on a HP LaserJet printer?

From the Home screen on the printer control panel, swipe right to navigate, and then touch Reports. From the Reports menu, touch Configuration/Status Pages. Select the Configuration Page item, and then touch the Print button to print the Configuration pages.

How do I print a configuration page on a HP LaserJet P2015?

On the printer, press Select and use the up and down buttons to scroll to Information. Then press Select and use the up and down buttons to scroll to Print Configuration. Press Select….

1. Walk over to the printer.
2. Press the Item button until Print Configuration or Print EIO Page appears on the display.
3. Press Select.

How do I configure my HP P2015 IP address?

HP LaserJet P2015 – configure fixed IP provided by Network Services

1. Select Network Settings tab.
2. Select Manual IP configuration.
3. Enter fixed IP provided by Network Services.
4. Save, then restart printer.

How do I print a configuration page on a HP LaserJet m506?

From the Home screen on the printer control panel, select Reports. Select Configuration/Status Pages. Select Configuration Page. Select Print to print the configuration and Jetdirect pages.

How do I print a configuration page on a HP LaserJet P1102w?

To print a config page from the HP LaserJet Pro P1102w, press the Cancel button (with the red X) and hold it down for four or five seconds. The green light will flash, and the configuration page will print out.

How do I connect my HP Laserjet p2015 to my computer?

HP Laserjet p2015 USB setup Connect the USB cable between your printer and computer only when prompted by the installer. Attach the square end of the cable at the rear of the printer. Link the rectangular end of it to the USB port on your computer. The printer now gets connected to the computer.

How do I change the IP address on my HP printer?

Click Networking tab, change the required IP address, subnet mask, and gateway. Change the IP configuration method from Auto to Manual, click Apply, and OK. Change back the IP address of the computer to the original IP address.

How to print configuration page on LaserJet p2015 printer?

To print the configuration page for a LaserJet P2015 printer, follow the steps below. Turn the printer on using the on/off switch located toward the back of the right side of the machine. The lights will blink and the printer will go through its warm-up sequence.

Is there a display on the HP LaserJet p2015?

Unlike many HP printers, the LaserJet P2015 does not have a built-in menu or a display screen. You can’t scroll through the menu options to find different settings or see how much toner is left in the cartridge. The only way to view information at the printer is to print out a configuration page.

How to configure HP LaserJet p2015dn network settings?

Configure fixed IP for LaserJet P2015dn network printer, connect to Mac OS and Windows laptops Reset printer JetDirect to factory settings to clear network settings. Plug in ethernet cable, make sure wall jack is active, should see green and orange blinking lights on printer’s ethernet connector.

How to print on a HP LaserJet pro printer?

Click the Services tab, and then select Config Page from the Print Information Pages drop-down menu. Click Print. The Self Test/Device Configuration Page prints.