How do I reset my Volkswagen immobilizer?

Turn off the engine and remove the key from the ignition. Press the “Lock” button on the smart key to lock your system and reset the immobilizer anti-theft system.

Why does my car says immobilizer active?

How do I start the car if the immobilizer system is active? If the system is not allowing you to turn on the vehicle with a registered key, it is likely because of the presence of a second registered key, an automated payment device, or an automated toll road device. If so, follow these steps to turn on your car: 1.

What is an immobilizer in a Volkswagen?

What is an immobilizer? All VW and Audio cars since about model year 2000 include a factory anti-theft system. This anti-theft system includes something called an immobilizer, or “immo” for short. When it? s working properly, the immobilizer allows the engine to run if the correct key is used to start the car.

How do I reset my immobilizer?

To reset the immobilizer, hold down the panic button. Wait for ten minutes if you push the lock button two times.

How do I reset my immobilizer key?

Hold down the panic button for five seconds to reset the immobilizer. Next, push the lock button two times and wait ten feet away from the car for ten minutes.

Can you bypass the immobilizer?

You can bypass the immobilizer by placing the key in keyhole hence deactivating the car’s immobilizer to remote start. The added security with Mobokey allows the security to be activated as soon as the phone moves away from the car, so you don’t have to worry about car security.

How does a VW immobilizer work?

When you turn the car on, the antenna around the ignition switch induces a voltage in the RFID transponder chip. When the key is recognized, the immobilizer module, part of the instrument cluster, sends a random number to the key.

What kind of immobilizer does a VW have?

VW up to 1999 don’t have an immobilizer because immo generation 1 was not equipped on Volkswagen sold in North America. 1999-2000 should have immo2. 2001-2005/6 use immo3. 2005/6-present use Immo4. Around 2010, VW keys changed their design even though they still use immo4.

Is the NASTF working with VW on immobilizer?

For the US Market the National Automotive Service Task Force (NASTF) has been working with automakers including VW to hopefully provide some form of access to Immobilizer information using the Secure Data Release Model (SDRM) .

How to restart a Volkswagon immobilizer you it still runs?

How to Restart a Volkswagon Immobilizer. 1 Step 1. Remove the incorrect Volkswagen key from the car engine. It is possible that the ignition will be locked and you will not be able to remove 2 Step 2. 3 Step 3.

Why is the Immobilizer activated on my car?

When the battery wasn’t charged, the one key into the ignition showed this immobile activated code. Once the battery was charged, only that one key had lost it’s programming connection to the vehicle, triggering the code. The other two keys worked properly.