How do you program a key fob for a 2005 Pontiac Montana?

How do you program a key fob for a 2005 Pontiac Montana?

Press and hold the fob’s “lock” and “unlock” buttons at the same time for 14 seconds. After you’ve held it seven seconds, you will hear a chime confirming successful programming. Wait the 14 seconds for a second chime. Repeat the last step for each additional remote.

How do you program a 2005 key?

How to Program a 2005 Dodge Key Fob

1. Sit in the drivers seat of your car.
2. Press the “Lock” button and release it five times.
3. Insert the key into the ignition switch and turn it to the “Run” position.
4. Wait for the dinging ignition alarm to stop.

What is Mall PGM fuse?

The MALL PGM fuse, when removed, will put the MALL (aka, the Body Control Module) into programming mode. This is used for programming keyless entry fobs.

How do I program my ignition key?

Programming a Single Key

1. Insert the key into the ignition, and turn it to the on position.
2. Leave the key in this position for 10 minutes and 30 seconds, and then turn it off.
3. Turn the key back on, and wait for additional 10 minutes and 30 seconds before turning it off again.
4. Repeat the process for a third time.

How do you program a Pontiac Montana key fob?

Press and hold the LOCK and UNLOCK buttons at the remote you are programming. After about 7 seconds, car should chime once to confirm synchronization of first transmitter. After about 14 seconds, car should chime again, to confirm that the programming has been completed.

How do you program a Ford keyless remote?

Step-by-Step Programming Instructions

1. Shut the car doors, then open the driver-side door. Press the UNLOCK button the driver-side door.
2. Now, turn the ignition from OFF to RUN 8 times.
3. Press any button on the Ford remote to program it.
4. Have more than one key fob?
5. Lastly, turn the ignition OFF.