How wide is a bike chain?

Chains come in 3⁄32 in (2.4 mm), 1⁄8 in (3.2 mm), 5⁄32 in (4.0 mm), or 3⁄16 in (4.8 mm) roller widths, the internal width between the inner plates. 1⁄8 in (3.2 mm) chains are typically used on bikes with a single rear sprocket: those with coaster brakes, hub gears, fixed gears such as track bicycles, or BMX bikes.

What is a KMC X10 chain?

The high-quality KMC X10 10 Speed Chain is perfect for both road and MTB (mountain bike) use as it gives you smoother shifts and incredible torque acceleration. It features a non-directional design which is compatible with Campagnolo and SRAM 10 speed derailleur systems.

How is chain width measured?

It is measured by measuring the distance between 3 links, then dividing it by two.

1. Chain pitch is shown with green markers, though it is determined by measuring the distance between 3 adjacent pins (blue mark) and dividing it by two.
2. Inner chain width, marked with blue arrows and lines.
3. From left to right:

Are 10 and 11 speed chains the same?

The spacing between 11-speed chainring teeth centers is not narrower than on 10-speed chainrings. In some cases, it is even a bit wider on 11-speed. So your system will perform pretty much the same as it does now if you were to replace your 10-speed chainrings with 11-speed ones.

How do I know what size chain I need for my bike?

Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.

What is the best MTB chain?

Quick Answer The Best MTB Chains

• SRAM 10. View at REI.
• KMC X9 SL 9. View at Jenson USA.
• KMC X10 SL. View at Jenson USA.
• Wipperman Connex 11S0. View at Amazon.
• Shimano CN-HG53. View at Amazon.
• KMC K810. View at Amazon.
• Wipperman Connex 11SX. View at Amazon.
• Connex 108. View at Amazon.

How do you calculate chain size?

What size chain do I need for 10 speed?

Bike Chain Size Chart

Drivetrain*	External Width, in	Internal Width, in
9 speed	1/4″ – 9/32″	11/128″
10 speed	1/4″ – 9/32″	11/128″
10 speed narrow	7/32″	11/128″
11 speed	7/32″	11/128″

What’s the difference between a 10 speed and 11 speed chain?

Though they both have almost similar width and cassette teeth, 11 speed’s chain width is 5.62 mm while the 10-speed chain’s width is 5.88 mm. Are they interchangeable? Sort of. You can use 11-speed chains on 10-speed bikes (and pay the premium price because the narrow chains tend to be more expensive).

How big is a Shimano x10-kmc hard drive?

1/2″x11/128″ | Compatibility: SHIMANO, Campagnolo and SRAM 10 speed drivetrain systems | 1×10 , 2×10 , 3×10

What’s the average width of a bike chain?

For example, single-speed chains have standard 1/8 inches width, while multi-speed chains with 5-8 speeds have an inner width of 3/32 inches. Bikes with 9-12 speeds have 11/128 inches inner width. The outer width also varies based on speeds.

Can you use a 10 speed chain on a 8 speed cassette?

Going further narrower, like a 10, or 11 speed chain on an 8 speed cassette can and often does work. However, especially with older 6 speed cassettes combined with 11, or 12 speed chains, there is a risk of a chain getting stuck between cassette sprocket teeth and/or poorer shifting.