How do I know if my Mino Link is high or low?

On the right side of your bike it will tell you. There’s an arrow that points to a high and low setting. It’s adjacent from where is says mino link on the inside of your frame.

Does Trek FX have suspension?

We’ll take a detailed look at the six main models (FX 1 through 6) and the differences between them, so you can see how they stack up against each other….

Component	Trek Dual Sport	Trek FX
Forks	Front suspension	Rigid forks
Brakes	Mechanical or hydraulic disc	Linear-pull, mechanical or hydraulic disc

When should you lock your suspension?

With a lockout fork a full suspension system can be utilized when riding downhill and on rough terrain. With the flip of a single switch the suspension can be made more rigid for riding uphill or on pavement.

Can you use wd40 on bike suspension?

Yes you can use WD 40 on your chain…. The big problem is getting the WD 40 on the rubber seals in the rear wheel bearings, suspension bearings, and the BB bearings. The WD 40 can really clean up a chain…it is too light to stick around long enough to act as a good lubricant…

What pressure should my bike suspension be?

Start with where you should be in the manual, assess how much travel you’ve used after a typical ride. If you are not cycling through your suspension, let out 5 psi at a time per ride.

How do you adjust a motorcycle front suspension?

After you’ve documented your current settings, it’s time to determine how many “clicks” there are on your adjustment knob. Start by turning the knob as far as it will naturally go clockwise. Then, once you’ve reached the end, turn it counterclockwise to the other end, counting clicks as you go.

How does trek Mino Link work?

In fact, the bottom bracket height does change between high and low modes. Trek’s adjustable geometry feature, dubbed Mino Link, offers the ability to set the bike in “high” or “low” mode. In low mode, riders keep the same bottom bracket height and pedal clearance as high mode.

Do you need suspension set up on Trek mountain bike?

Trek mountain bikes are incredibly sophisticated and require a small amount of set up for the individual rider. Going through this process is necessary to make sure your new bike performs as it was designed. Follow these simple steps to optimize your suspension performance.

How do you adjust the shock on a Trek bike?

Set the compression damping to “open” by turning the blue knob on your fork all the way counter-clockwise, and the blue lever on your shock counter-clockwise. Use the Trek Suspension Calculator above to find a good starting PSI for your MTB and your weight, and use the shock pump to adjust the shock’s PSI…

How to speed up the rebound of a trek Fork?

If you feel a bucking sensation from your shock, or a pogo stick sensation from your fork, slow the rebound by turning the red knob 1-3 clicks clockwise. If you feel like the shock or fork is packing down, or not fully recovering from successive hits, speed up the rebound by turning the red knob 1-3 clicks counter-clockwise.

What kind of suspension do you need for a mountain bike?

Proper suspension set-up is a crucial component of getting the best performance out of your mountain bike. Front suspension forks and rear shocks both require simple adjustments to work best for a particular rider, so this information is relevant to riders of both hardtail and full suspension mountain bikes.