How do I restore my DIRECTV service?

Refresh your DIRECTV service and equipment

1. Go to My Equipment.
2. Review the equipment you have and identify the impacted receiver(s).
3. Select Refresh receiver to begin. This takes a minute or two and may briefly interrupt your service.

How do I reconnect my DIRECTV?

Select Settings & Help > Network Setup > Restore Defaults. Once the receiver has completed restoring its default settings, select Connect Now. If the receiver doesn’t connect, you can reset it. Unplug your receiver and router, wait 15 seconds, plug both back in, and wait for them to reboot.

How do I reconnect my DIRECTV box wirelessly?

Connect a receiver to a wireless network

1. Check that the router does not have a WPS logo.
2. Connect the Wireless DIRECTV CINEMA Connection Kit device to the receiver.
3. Use the DIRECTV remote control to select Set Up Now on the TV.
4. Choose your wireless network from the list and select Continue.

How do I fix DIRECTV pixelation?

There are three ways to do this:

1. Press MENU then go to Settings, then Reset Options. Choose Restart all Locations.
2. Find the red reset button and push it. It’s usually behind a spring-loaded door on the front of your receiver.
3. Unplug your receiver (or Genie DVR) for at least 15 seconds then plug it back in.

How do I reboot my DIRECTV receiver?

Unplug your receiver

1. Unplug your receiver’s power cord from the electrical outlet, wait 15 seconds, and plug it back in.
2. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.

Why does my DIRECTV not work?

Reset your receiver Press the red reset button which is located on the side of most DIRECTV receivers or inside the access card door on the front panel. Wait for your receiver to reboot. If your receiver doesn’t have a red reset button: Unplug the receiver’s power cord from the electrical outlet.

How do I reboot my bell receiver?

Reboot your receiver

1. Press and hold-down the green POWER button on the front of your TV receiver for 5 seconds (until the red, green, and blue lights come on).
2. Wait a few minutes for the reboot to take place.
3. Once the reboot completes, content from the channel that you last viewed appears.