What is Onzen Arctic spa?

The Onzen™ Salt Water system is Arctic Spas® proprietary salt water system that produces sanitizer from Dead Sea salts through the process of electrolysis. The second key feature of Onzen™ is the ability to control the system either from the topside control, or via the Arctic Spas® smartphone App.

What is in Onzen salt?

Arctic Pure Onzen Sea Salt Blend (Sodium Chloride) is a natural salt water care product. A unique blend of natural Dead Sea Salt and proprietary water clarifiers designed specifically for the Arctic Spas Onzen and Spa Boy water care systems.

How do I lower the chlorine in my Arctic spa?

Adjust the chlorine levels using “Boost” granular chlorine, after heavy use or if the Onzen Output is too low….

1. Test the water for chlorine content. If the level is low add Boost.
2. Check your filters as they may require replacement.
3. Check you pH level you may need to adjust you pH down.

How do I raise the pH in my Arctic spa?

Low pH – Can be raised by adding Arctic Pure Salt Water Balance, Adjust Up to the spa water. High pH – Can be lowered by adding Arctic Pure Salt Water Balance, Adjust Down to spa water. Check the Free Chlorine Level to ensure it is in the target range.

Does salt water balance lower pH?

Since adding salt to water does not result in any chemical reactions, the salt will not alter the pH level of water.

Can you go in hot tub if chlorine is too high?

If the chlorine levels are too high, you can either wait it out and let the chlorine break down naturally or replace some of the water in your hot tub with fresh water. You can also use a chlorine neutralizer to quickly eliminate excess chlorine.

What happens if you get in a hot tub with too much chlorine?

If theres too much chlorine it will vaporise and form gas that floats just above the surface of the water. If this vapor is inhaled it can inflame airways and exacerbate certain breathing conditions. Read more What Temperature Should My Spa Pool be at and Why?

Do you adjust pH or alkalinity first?

Remember that the alkalinity if set correctly locks the pH in place and gives you the ability control it. Preventing the pH from going up and down randomly. You should always adjust the alkalinity first to the 80-100 ppm range then the adjust the pH to the 7.2 to 7.8 range.

How to change filter duration in Arctic Spas?

Filtration Settings – Arctic Spas The display will show FSxx, “xx” representing the starting hour of the cycle. Use the arrow keys to adjust the hours. Use the Light key to jump to the next parameter, filter duration (Fd). The display will show Fdxx, “xx” representing the duration in hours of the filter cycle.

How do you set onzen on a pump spa?

So, to adjust your Onzen settings on a standard one-to-three pump spa that we offer, you’ll use the settings button. It’s the second one over on the bottom row. You press it once, and it will say “SETT,” and then you wanna scroll down until you see “O-N”, so “O-N” here.

When to turn on Arctic Spas quick reference card?

When water temperature is 1ºF (0.5ºC) lower than the Set Point, the heater will automatically turn on & heat until the water temperature reaches 1ºF (0.5ºC) above the set point. The Heater indicator lights up when the heater is on. Arctic Spas® Quick Reference Card Temperature unit: Press and hold the light button for 5 seconds to toggle

How can I maintain my Arctic hot tub?

Then, start maintaining your water manually using “Boost” granular chlorine to sanitize and Adjust Up / Arctic Pure Salt Water Balance to balance pH. Continue to do this daily until the system is repaired by an authorized service technician. * Keep enjoying your hot tub!