What would cause a GE washing machine not to drain?

What would cause a GE washing machine not to drain?

A kink or clog in your washing machine’s drain hose could be interfering with water flow and preventing your machine from draining properly. To inspect the drain hose, turn off the power to the washer, disconnect the hose (have a bucket ready to catch any water), and check the hose for damage or obstructions.

Why my GE washer won’t drain and spin?

Make sure the drain hose is properly connected and that there are no kinks or pinched areas. Your washer may not drain and enter the spin cycle if the pump filter is clogged. A clogged household drain can also cause water to stand in the washer and prevent the spin cycle from starting.

What do you do when your GE washer won’t drain?

If the washer won’t drain or is not draining properly, and the washer has a coin trap, remove the coin trap and clean it thoroughly. First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions.

What’s wrong when a washing machine won’t drain?

There are a few possibilities why your washing machine won’t drain. Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed.

How do you reset a GE washing machine?

Reset your GE washing machine by pressing the “Off,” button, waiting one minute and then pressing the “On” button. Reset the control panel by holding down the “Back” and “My Cycles” buttons concurrently for three seconds and then releasing.

What are some common problems with ge top load washers?

Water flow issues are among the more common problems in GE washing machines, and they are generally easy to fix. If your washer won’t fill, check the hot and cold faucets to make sure they’re both turned on fully. GE washers require water pressure between 10 and 120 pounds per square inch.

Why does GE washing machine not spin?

One of the most common reasons why your washing machine has stopped spinning is when it can’t drain properly due to a blocked drain pump. This can happen when something gets stuck in the outlet pipe, preventing the steady flow of water in and out of the machine.

Why does GE washer not spin?

If your GE front load washer won’t spin or tumble you may have a problem with the inverter or motor. If this is the case, you will see a motor or inverter error code. On these GE front load washer models these three errors are motor errors and can be caused by a bad inverter or motor.