How do I know which Baxi boiler I have?

The serial number can usually be found on the drop down panel on the front of the boiler. Some boilers have a tag underneath the boiler that slides out to reveal the serial number. If you can’t find your serial number, call Baxi Customer Support 0330 678 0917 with the name of your boiler and they will help you find it.

How do you start a Baxi Solo boiler?

Turn the boiler thermostat knob to the ‘0’ position fully anti- clockwise. Turn on the main gas and electricity supplies to the appliance. To light the pilot: Looking through the pilot viewing window press the gas control knob fully inwards and hold. Press in igniter button and release.

What number should a Baxi boiler be on?

The normal operating water pressure for your boiler and central heating system is between 1.0 and 2.0 bar. If the pressure drops below 1.0 bar, you need to repressurise it.

Why is my boiler not giving me hot water?

The most common cause of no hot water from your gas boiler is the pilot light going out. The pilot light is used to ignite the gas which heats the water in the boiler. This is a safety device to ensure that gas does not leak out when the pilot light is not there to burn it.

How do you find out when a boiler was installed?

The easiest way to find out the age of your boiler is to look for its serial number. A serial number is a long sequence of numbers & letters that are unique for that boiler.

Why would a boiler not ignite?

Some boilers won’t ignite if the gas or water pressure is too low. Low gas pressure could be a problem with supply in the area and you may need to call out the supplier to check. Alternatively, it may be that the water pressure is too low in a sealed system boiler.

Why does the red light keep coming on on my boiler?

Usually, when modern boilers need resetting they will display a fault code or begin to flash a red or green light. These signals indicate that your boiler senses a problem, which is why it has stopped working and needs to be reset.

Why is my Baxi boiler flashing?

1 red flash means there could be temperature, sensor or flow faults. You will need an engineer to locate the issue. 2 red flashes is a sign your boiler has overheated. Try bleeding your radiators before calling an engineer.

What do you do when your boiler won’t turn on?

If your boiler won’t turn on, the first thing you should do is check other appliances and power supplies in your home to see if they are working. If they are, check your fuse box to see if any switches have failed or tripped. If you still cannot find the cause, we recommend getting in touch with a trained engineer.

Where is the pilot light on my boiler?

Manual Boiler Pilot Light Ignition The gas control knob box will be gray and situated near the floor at the front of the boiler. The knob will be situated on top. Turn the gas control knob to the “pilot” position, then press down on the knob. Pressing down on the knob will release gas into the pilot light orifice.

Where can I get a Baxi boiler manual?

Listed below are all the manuals for Baxi. Just click on the model or the Gas council number and the manual will download at the bottom of the page. After you have downloaded the manual double click on the download for the manual to open, if you want to save the download right click.

What kind of gas does Baxi solo 2 RS use?

INTRODUCTION Description The Baxi Solo 2 RS is a wall mounted gas fired room sealed natural draught central heating boiler with range rated outputs as shown in the table below. Each appliance is preset at its MAXIMUM heat input rating and is designed for use on NATURAL GAS only.

Which is quality is built into every Baxi product?

Quality is built into every Baxi product – products which fulfil the demands and needs of customers, offering choice, efficiency and reliability. To keep ahead of changing trends, we have made a

Where can I find the manual for my boiler?

To view the associated documentation and manuals for your boiler, please select from a category below.