How much does a TR6060 transmission weigh?

Published by Charlie Davidson on

How much does a TR6060 transmission weigh?

Weight: 146.1 lbs.

Is the TR6060 a good transmission?

The TR6060 is a very good transmission. One of the best out there IMO. Very strong and reliable with a close ratio spread. The 1-2 shifts are a bit notchy when cold, which may be what your experiencing.

How much power can a TR6060 handle?

It’s rated to 650-700 ftlbs by Tremec.

What vehicles have a TR6060 transmission?

What is a TR6060? The Tremec TR6060 6 speed manual transmission debuted in 2008 and quickly became a widely available transmission in many new performance cars including the Dodge Viper, C5 and C6 Corvettes, 5th- and 6th-generation Camaros, Dodge Challenger and others.

Is TR6060 better than T-56?

The 3-4 synchros are larger and stronger for the TR-6060, too (left). The one in the TR-6060 measures 4.760 inches in diameter versus the T-56 part’s 4.115-inch diameter. It also has fine-tooth gear angles, with more teeth than the T-56—64 teeth compared to the T-56’s 36 teeth, in the case of these examples.

How do I know if my transmission is TR6060?

How to Locate a TREMEC Part Number

  1. Locate the transmission. Find the rear extension housing, which is connected to the main case.
  2. Check for a metal tag attached to one of the bolts.
  3. Locate the TREMEC part number by identifying the alphanumeric number, which begins with a “T” for most transmission models.

How strong is a TR-6060 transmission?

The TR-6060 contains removable wear pads on the shift forks, and uses aluminum alloys for the main case, extension housing, and clutch housing. It is manufactured by TREMEC (formerly Transmission Technologies Corporation) and is rated for 600 lb⋅ft (810 N⋅m) of torque.

Is TR-6060 better than T56?

How do I know if my transmission is TR-6060?

How do I know if I have a TR6060?

How much torque can a T56 handle?

The TR6060 has its roots in the venerable T56, but designed for much more powerful engines – with a torque rating of 700 lb-ft. That’s serious capacity from a factory-built manual transmission.

How much does a Tremec TR-6060 transmission weigh?

TREMEC TR-6060 Transmission Specifications Type: Rear wheel drive, six-speed manual dual overdrive transmission Maximum gross vehicle weight:* 2,400 kg (5,291 lb) *For reference only.

What kind of transmission does a Tremec T-56 have?

Tremec TR-6060 transmission. It is derived from the Tremec T-56 6-speed manual transmission. As usual, the forward helical cut gears are synchronized however, the reverse gear operates through a fully synchronized constant-mesh system. The TR-6060 contains removable wear pads on the shift forks, and uses aluminum alloys for the main case,…

Is the TR-6060 a mechanical speedometer?

The TR-6060 was designed for modern vehicles with myriad electronics, and it has no provisions for a mechanical speedometer output. Some versions do not even have an electronic output, as they rely on wheel speed sensors rather than a signal from the transmission output shaft to determine vehicle speed.

What kind of fluid does a Ford tr 6060 use?

General Motors uses Texaco ATF Type III 1863 fluid and is certified “fill-for-life,” requiring no fluid changes. Ford US lists a fill specification of 3.65 quarts of Mercon-V automatic transmission fluid.

Categories: Contributing