How do I get Windows 8 to recognize my external hard drive?

From the Desktop

1. Press the “Windows” key or click the “Desktop” tile on the Start screen.
2. Insert the USB flash drive into an available slot and wait for the device to appear under Computers.
3. Click the associated drive letter to view the device’s contents in the right pane.
4. Press “Windows-Q,” type “diskmgmt.

Why is my hard drive not showing up in devices?

If your new harddisk is not detected by or Disk Manager, it could be because of a driver issue, connection issue, or faulty BIOS settings. These can be fixed. Connection issues can be from a faulty USB port, or a damaged cable. Incorrect BIOS settings may cause the new hard drive to be disabled.

What do I do if my hard drive is not detected in my computer?

How to confirm whether the hard drive is spinning up or not?

1. Boot the computer and try to catch some noise.
2. Power off the system.
3. Disconnect the power cord from the system.
4. Remove the power cable when the hard disk is not detected, or the hard disk you are trying to fix.
5. Reconnect the power cord to the system itself.

How do I fix Windows not recognizing my external hard drive?

What to Do When Your External Hard Drive Won’t Show Up

1. Make Sure It’s Plugged In and Powered On. Western Digital My Book.
2. Try Another USB Port (or Another PC)
3. Update Your Drivers.
4. Enable and Format the Drive in Disk Management.
5. Clean the Disk and Start From Scratch.
6. Remove and Test the Bare Drive.

Why is my internal hard drive not detected?

The BIOS will not detect a hard disk if the data cable is damaged or the connection is incorrect. Serial ATA cables, in particular, can sometimes fall out of their connection. Be sure to check your SATA cables are tightly connected to the SATA port connection.

How do I enable my hard drive in BIOS?

To Set the System BIOS and Configure Your Disks for Intel SATA or RAID

1. Power on the system.
2. Press the F2 key at the Sun logo screen to enter the BIOS Setup menu.
3. In the BIOS Utility dialog, select Advanced -> IDE Configuration.
4. In the IDE Configuration menu, select Configure SATA as and press Enter.

How do you recover hard disk data when it is not detected?

1. Launch EaseUS Data Recovery software on your computer, select the external hard disk not detected to get started.
2. The hard drive recovery will start scanning the disk to searching your lost data and files.
3. After the scanning, you can check all recovered files.

How do I get BIOS to recognize my hard drive?

Check if the hard drive is disabled in the BIOS

1. Restart PC and enter system setup (BIOS) by pressing F2.
2. Check and switch on hard drive detection in system configurations.
3. Enable the auto-detection for future purpose.
4. Reboot and check if the drive is detectable in BIOS.

How do I get Windows 10 to recognize my external hard drive?

Press Windows + X and select Disk Management. In Disk Management, you can see all detected disks are listed. If you see your external hard drive is listed but has no drive letter, you can right-click the drive and select Change Drive Letter and Paths.

Why is my external hard drive not showing up?

Change the connection between the external hard drive and computer, you can make the external disk showing up. Step 1. Change a new USB cable if the old one is damaged and connect the drive to the PC. Step 2. Change the USB port if the external hard drive doesn’t show up, and reconnect the drive to the PC. Step 3.

What to do if your USB drive is not showing up in Windows 10?

Click on “Disk drives”, right-click on your USB drive that is not showing up in Windows 10 and choose “Uninstall device”. (Make sure you have selected the correct USB device.) Step 3. In the prompt asking you to confirm the removal, click “OK”.

How to fix hard drive that cannot be detected by Windows?

1 Right-click on Start, click “Device Manager”. 2 Expand Disk driver and locate the hard drive which cannot be detected by Windows. 3 Right-click on the disk and select “Update Driver Software” from context menu. 4 If there are any updates, follow further instructions to update the disk driver.

How can I make my hard drive show up again?

Format hard drive to make it show up on the computer again Step 1: Press Windows Key + R, type diskmgmt. msc into the Run dialog, and press Enter. Step 2: In the Disk Management, right-click the hard disk partition you need to format and then choose Format.