How do I backup the configuration of my Brocade switch?

Backing up a Brocade switch

1. Establish a putty session to the switch and login as normal.
2. Enter the command configupload.
3. At the protocol selection prompt choose the protocol appropriate for you FTP server.
4. At the IP Address prompt enter the IP address of the FTP server Server Name or IP Address [host]: 10.10.10.5.

How do I backup my SAN switch settings?

Use WinSCP to download the file or use the FTP get sub command to move the file from the switch to the FTP server. You will need the root password for the Brocade switch to get the file you need. ftp> Guest login ok, access restrictions apply. 200 PORT command successful.

How can I take backup configuration?

In the DataCore Servers Panel, right-click on the server group and select Backup Configuration in the context menu. In the >Backup Configuration dialog box, enter the complete path to a local folder where the files should be copied. Provide a path for each DataCore Server in the group.

What is backup configuration?

Configuration backup is the process of extracting configuration settings from a system and writing it to disk. The configuration restore process uses backup configuration data files for the system to restore a specific system configuration.

How do I download config files from Brocade switch?

On the Fibre Channel Switch for Brocade page, click View & Download. On the Fibre Channel Switch – Brocade page, click the MetroCluster link. Follow the directions on the MetroCluster Configuration Files for Brocade Switches description page to download and run the files.

How do I get Brocade Supportsave?

Answer

1. Log on to the switch as admin using telnet or ssh.
2. At the command prompt type: supportsave.
3. You are prompted as: a) the IP address of your FTP server.
4. The files generated by this command are compressed before being sent off the switch. You can then compress these files together before sending to IBM Support.

Where is the backup configuration file stored?

/etc/configs directory
By default, backup configuration files are created in the /etc/configs directory. You can clone the configuration of one storage system to another system. You can restore storage system configuration information from a backup configuration file.

What is Configupload in Brocade?

Use this Service Template to execute ‘configupload’ command on Brocade FC switches; typically configupload is used to backup the switch configuration to a remote server. ‘configupload’ is executed via ssh rather than ftp when using this service template. Backup Brocade FC switch configuration using configupload.

What is the default password for Brocade switches?

admin
The default password of “admin” is “password”. The OS of brocade switch uses Linux 2.6 kernel. The root is super administrator account.

How to backup / restore Brocade FC switch config?

1) Login to switch using Utility like Putty / Kitty. 3) Start it and add one user. Give LRW Permissions. (e.g. Shown below) 1) Login to switch using Utility like Putty / Kitty. Save the commands output in text file. Now your switch is Backup Up!!!

How to backup a brocade switch using FTP?

Prerequisites – The switches need an FTP server to backup to. You will need to know the IP address of the FTP server and a user account with access to proceed. 3 At the protocol selection prompt choose the protocol appropriate for you FTP server. Press enter to select the default FTP

Which is the target of the FC switch?

B2) FC “inititator” typically the source (i.e. the HBA within the appliance) which, when a SAN switched fabric is present will perform an FLOGI and PLOGI to logon to the SAN fabric. B3) FC “target” typically the storage device (i.e. the FC port (s) on the tape drives) – or front end ports of a disk array.

How to switch FC HBA to netbac?

Collect the FC HBA WWPNs from the appliance. These are your initiator WWPNs. Collect the FC Tape Drive WWPNs from the tape library. These are you target WWPNs. Here’s an example for Brocade to zone the two appliance FC HBA ports to four FC tape drives: . The above assumes you have a ‘config’ named ‘CFG_FAB_A’ that already exists.