How much horsepower does a 1987 Toyota MR2 have?
How much horsepower does a 1987 Toyota MR2 have?
122 hp
With 122 hp, the naturally aspirated 1.6 Liter 16v Inline 4 gasoline engine accelerates this MR2 16v to 62 mph in 8.1 seconds and on to a maximum speed of 127 mph. Having a curb weight of 2271 lbs, it achieves 32.2 mpg on average and can travel 349 miles before requiring a refill of its 10.8 gallon capacity fuel tank.
How much horsepower does a 1988 Toyota MR2 have?
1988 brought a supercharged engine that gave the MR2 a welcome boost in power, and production ended the following year. Power comes from a 1.6-liter supercharged 4-cylinder engine, rated at 145 horsepower and 140 lb-ft of torque. It spins the rear wheels via a 5-speed manual transmission.
Is an MR2 a Supra?
The Mk2 Toyota MR2 arrived in the U.S. in 1990 for the ’91 model year, and like many Japanese sports cars of the decade, such as the Toyota Supra and Mazda RX-7, the MR2 moved significantly upscale, becoming more expensive in the process. Tires were wider for all MR2 models as well.
Can you drift an MR2?
You simply cannot drift an MR2 very well without a very large amount of power. To get that power you are going to have to use a large turbo which creates lag which basically makes it impossible to drift.
Are there supercharged axles for the E51 AW11?
After a long wait we finally have E51 supercharged axles for the AW11. These are stronger than OEM, rated at 425 WHP but should take a good bit more on a car that isn’t hammered on regularly. We can get a stronger version with a stronger outer joint making them good for 600+ but it would also require a different outer hub.
What’s the horsepower of an AW11 MR2?
It should work fine for the torque recommended by the service manual. After a long wait we finally have E51 supercharged axles for the AW11. These are stronger than OEM, rated at 425 WHP but should take a good bit more on a car that isn’t hammered on regularly.
What kind of ECU does the AW11 have?
It works on the AW11, AE86 and any other car running a 4AGE with the stock ECU. This tool has been designed to be ultra compact. You will barely notice it in your glovebox and can even keep it in your ash tray or wallet if you find yourself doing a lot of diagnostics. It is also highly customizeable.
Can a FWD transmission work on an AW11?
This is a seal retainer kit that allows you to convert a FWD transmission to work with the AW11. These Delrin shifter base bushings replace the soft rubber bushings and firm up the shifter removing all play from the shifter base. This plate gets welded to the chassis where the front motor mount anchors.
