How to load Paper in hp designjet 111?

HP Designjet 111 Printer Series – Load paper into the rear path

1. Place the paper in the rear feed, to the left as seen from the rear, with the side upwards that is to be printed on.
2. Push the paper as far as it will go into the printer.
3. Select Rear manual feed as the paper source in the printer driver.

How do I load Paper into HP Designjet?

From the front panel, press , then the roll icon, then Load. Alternatively, press , then , then Paper > Paper load > Load roll 1 or Load roll 2. If the roll you have selected is already loaded, you have to wait while it is automatically unloaded.

How do you print on HP roll Paper?

To select the custom paper size as Endless Roll select the plotter Driver Properties > Printing Preferences > Paper Size. Select more sizes and select Endless Roll from the Select a form drop down and click OK. The Application page size will be displayed as Custom: Endless Roll.

How do I load Paper into my HP Designjet z5400?

How do I clean my HP Designjet 111?

Right-click the HP Designjet printer and click printing preferences….Cleaning Printheads:

1. Click Clean Printheads under maintenance on the left-hand side of the window.
2. Choose soft, medium or hard to perform level 1, level 2, or level 3 cleaning, respectively.
3. Click Clean Printheads.

How do you load a plotter paper?

Loading Paper In To the Plotter….

1. Make sure the plotter is at the.
2. Gently push the paper roll into the.
3. Push the menu key then make.
4. Select “Paper load”, then “Load.

How do you print continuous paper?

Set Up Continuous Feed Labels for Printing

1. Select File > Printer Setup.
2. In the Printer Setup dialog box, select your printer.
3. Set the Paper Feed Source to Tractor.
4. In the Printer Paper Size field, select User-Defined.
5. Define the paper size as 3.5 inches wide and 12 inches tall.
6. Leave the Offsets at 0, and click OK.