Is there a fuse for the cruise control?

The cruise control fuse is normally found in the fuse panel located below the steering wheel. Remove the cover of the fuse panel and locate the fuse for the cruise control using the fuse diagram on the fuse panel.

Where is the fuse for the cruise control on a 2008 Silverado?

The 2008 Chevy silverado cruise control fuse is located in the internal fuse panel that is on the driver side of the dash.

Why does my cruise control not work on my 2008 Chevy Silverado?

Simply put the computers think that the brake lights are on and the cruise control is disengaged. The test is to look for power on the light blue/white wire at the stoplight switch. The key must be on and you will want to check for power on that wire with the brake pedal released and also gently pushed.

Where is the fuse box in a 2008 Chevy Suburban?

The underhood fuse block is located in the engine compartment, on the driver’s side of the vehicle.

How do I know if my cruise control module is bad?

Symptoms of a Bad or Failing Cruise Control Vacuum Bleed Switch

1. Cruise control does not disengage when pedal is pressed.
2. Cruise control disengages on its own intermittently.
3. Hissing noise coming from under the dash.

Why did my cruise control just stop working?

A blown fuse is the simplest to explain. If the fuse of your cruise control is bad, the cruise control won’t work. If the speed sensor or speedometer isn’t working, the cruise control won’t work either, since this feature is partially responsible for making the cruise control function properly.

Why would cruise control stopped working?

Where is the cruise control fuse on a 2011 Chevy Silverado?

The fuse for the 2011 Chevy Silverado cruise control is located in the engine compartment and is number 34. The fuse box is near the front end under the hood on the right (driver’s left) side.

How do you test a cruise control switch?

To test this, simply start your engine and press the “on” button on your cruise control switch. If the cruise control light illuminates on your dash or instrument cluster, the switch should be working fine. The next step will be to complete a road test to truly examine if your repair was completed correctly.

What would cause my cruise control to stop working?

When the fuse of for the cruise control blows, the cruise control will stop working altogether. A vehicle’s cruise control may stop working if the vacuum actuator has stopped working or if there is damage to the vacuum hoses. The system may also fail if the cable linking the actuator to the throttle is broken.

How do you turn off cruise control on a Chevy Silverado?

This action signals the cruise control module (or powertrain control module) to monitor the speed sensor and actuate the throttle as necessary. To turn cruise control off, the driver can either select “off” on the switch or close the stoplamp switch on the brake pedal assembly.

Where is the fuse block located on a suburban?

The instrument panel fuse block access door is located on the driver’s side edge of the instrument panel. The center instrument panel fuse block is located underneath the instrument panel, to the left of the steering column. The underhood fuse block is located in the engine compartment, on the driver’s side of the vehicle.

What to do if your Cruise Control is not working?

A diagram of the stoplamp switch. This switch can be found on the steering wheel, although some switches can be found on the dashboard. If only one setting on your cruise control does not work, chances are high that the switch is the problem. Test the switch the same way the brake switch is tested.