Can a pinewood derby car be shorter than 7 inches?

Can a pinewood derby car be shorter than 7 inches? Yes, you can make your car shorter but it is not recommended. A shorter car will have a lower center of mass at the start so it will have less energy to convert into speed when going down the track.

Do derby car weight need to covered up on car?

Axles must not be completely covered – TIP – Leave center open so that the inspector can verify the axles are not solid. 2. Be mindful of material added to the bottom of the car, or anything else which alters the depth of the wheels. Weight of the car cannot exceed 5 ounces.

Where should the weight be on a pinewood derby car?

Best Location to Weight Your Pinewood Derby Car When deciding on where to weight your car, you should try to reach a final balance point of the car 1 inch or less in front of the rear axle. To achieve this, place 2/5 of the added weight behind the rear axle, and the remaining 3/5 in front of the rear axle.

How far apart should the wheels be on a pinewood derby car?

The car may be hollowed out and built up to the maximum weight by the addition of wood or metal that is securely fastened to the car body. 7. The wheel base (distance from front axle to the rear axle) may not be altered. The cut slots must be used for the axles and the wheel base distance must be 4-1/4 to 4 3/8 inches.

Can a Pinewood Derby car have 3 wheels?

— Make a Three-Wheeler: Raise one wheel about 1/16 inch higher so it never actually touches the track. Less friction = more speed. Rules vary from pack to pack, so make sure to check your pack’s Pinewood Derby rules to make sure three wheelers are allowed in your race.

Can you put weights on top of pinewood derby car?

Place a pencil under and across the car one inch in front of the rear axle. This is where the car should balance. Place the flat weight on the top of the car and move it forward and back until the car balances on the pencil. This is where the flat weight should be placed under the block.

Can you put weights on top of Pinewood Derby car?

How much weight does paint add to a Pinewood Derby car?

Paint only adds a few grams (hundredths of a ounce). We generally weight up to 4.9 oz and then do the last weight adjustment at check-in.

What are the rules for the pinewood derby?

Official Pinewood Derby Rules. (Rules from BSA Pinewood Derby Kit) Car Dimension Rules.  The overall length of the car shall not exceed 7 inches.  The overall width of the car shall not exceed 2 ¾ inches.  The car must have 1 ¾” clearance between the wheels.  The car must have 3/8” clearance underneath the body so it does not rub on the. track.

Is the Old Hickory Council still in business?

Despite Old Hickory Council needing to postpone many events this past year, we were still able to help units deliver quality programs both virtually and in-person (following the CDC recommended guidelines). The delivery of many Family Friends of Scouting presentations will be delayed this season.

What should Cub Scouts wear to Pinewood Derby?

David Meade, author of Pinewood Derby® Speed Secrets, offers useful guidelines for maintaining safety: Gather your safety essentials: dust mask, goggles, and latex gloves. Wear eye protection at all times. Monitor Cub Scouts’ use of tools. Wear a dust mask when appropriate.

Is the Scout Shop in Old Hickory Open?

The Scout Shop is open: Monday – Friday 10AM – 5PM, and Saturday from 10-2PM. Hours: The Old Hickory Council Service Center is open. Office hours will remain Monday – Friday 9 AM – 5 PM.