How do I install HP Network Configuration Utility?

Go to the Control Panel. Right click “HP Network Configuration Utility” (NCU), select Run as Administrator. Select the Team that you want to add a NIC to. Select the NIC(s) that you want to add to the Team.

How do I find my HP iLO server IP?

During the HP server boot process, press the F9 key to access the system utilities.

1. Select the System Configuration option.
2. On the next screen, select the iLo Configuration Utility.
3. Select the Network Options entry.
4. On this screen, you will be find out the HP iLo interface IP address.

How do I change my IP address on iLO?

From the iLO RBSU screen, select network→DNS/DHCP, and then press Enter….Configuring a static IP address (iLO RBSU)

1. To set DHCP Enable to OFF, press the spacebar, and then press F10 to save the changes.
2. Select DHCP Enable.
3. To set DHCP Enable to OFF, press the spacebar, and then press F10 to save the changes.

What is the latest HP ProLiant server?

Meet our newest servers: the HPE ProLiant DL365 Gen10 Plus and the HPE ProLiant DL345 Gen10 Plus. From your Virtualization and Security requirements to Real-time Decision Making for your data intensive workloads – we’ve got you covered.

How do I open network configuration utility?

Click Windows Start, Programs, and WLAN Access Point Utility to launch the Access Point Configuration Utility. Click AP in the toolbar and then click Scan. To access the Access Point Web Configurator, double-click the name of the correct Access Point in the list.

How do I connect to my HP iLO server?

1. Start the Remote Console application by typing the IP address of the ILOM service processor into a browser on the remote system.
2. Click Yes.
3. Enter the user name and password, and click Log In.
4. Click the Remote Control tab in the ILOM web interface.
5. Set the mouse mode to Absolute mode in the Mouse Mode Settings tab.

How do I access iLO web interface?

You can access the HPE iLO web interface by using your existing HPE iLO account information, or by using the IP address available on the server screen during POST and the username and password located on the HPE iLO Default Network Settings tag with the server (this HPE iLO Default Network Settings tag also contains …

What is the difference between HP ProLiant ML and DL servers?

The main difference is that the DL line is “density optimized” meaning that they are smaller, which usually means that they have less expansion – like fewer PCI slots and fewer drive bays. The DL line usually has an integratde Smart 5i/6i controller, where the ML line usually does not.

How do I log into my network configuration utility?

To open the web-based configuration utility: Open a Web browser. Enter the IP address of the WAP device that you are configuring in the address bar on the browser, and then press Enter. The Login page opens.

What is network configuration Utility?

The Network Configuration Utility (NCU) configures a system’s Network Interface Card (NIC), TCP/IP settings, and domain information for use in Recovery Environment. Note: The PE Network Manager provides a comprehensive set of network options. However, most Recovery Environment scenarios work with the default settings.

What is the HP ProLiant Gen9 server user guide?

HP ProLiant DL360 Gen9 Server User Guide Abstract This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.

How to install a ProLiant dl380 Gen9 server?

Operations Power up the server Power down the server Extend the server from the rack Remove the server from the rack Remove the access panel Install the access panel Accessing the rear panel Opening the cable management arm Remove the fan cage Remove the hot-plug fan Remove the PCI riser cage Install the PCI riser cage

What is part number of HP ProLiant dl360 server user guide?

This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels. Part Number: 767927-001 September 2014 Edition: 1

Is the HP ACU compatible with dl380 Gen9?

I have DL380 Gen9 installed via Provisioning with Windows Server 2012. The RAID array has been created during provisioning. I have also downloaded the latest HP ACU (9.40.12.0) and installed it.