What is WOCA Natural Soap?

WOCA Natural Soap is a gentle cleaner for oiled and hardwax wood flooring and wood surfaces. The active ingredients, soy and coconut fat, leave an invisible film barrier on your wood surface which conditions and strengthens the finish. Regular use helps the wood surface become more stain and water resistant.

How much WOCA Soap to use?

Mix 3 ounces of Soap into each gallon of lukewarm water. It is recommended always to work with 2 buckets; one with the Soap solution and the other one with rinse water.

Is Woca Oil Danish oil?

WOCA Woodcare The European style oil finish provided by Woodcare of Denmark (WOCA) will both penetrate and harden to achieve a very wear resistant finish, which is easily applied and maintained. This type of oil finish has been manufactured in Europe for over 30 years.

How do you use Woca spot remover?

WOCA Spot Remover Details

1. Spray Spot Remover evenly on the stain directly from the canister.
2. Leave the Spot Remover to dissolve the stain for 10-20 min.
3. Scrub with a soft bristle brush until the stain has been dissolved.
4. Repeat steps if necessary.
5. Wipe the spot with a cloth wrung out in luke-warm water.

How do you do lye floors?

WOCA Wood Lye

1. Damp mop the floor with WOCA Intensive Wood Cleaner (see separate instructions).
2. Apply the lye undiluted with a brush or paint roller in an even coat on the floor,following the wood grain.
3. Apply at least one liter of lye for every 100 sq.
4. On vertical wood surfaces, apply from top to bottom.

How long does Woca oil take to dry?

about 4 hours
Maintenance Oil has a drying time of about 4 hours.

What is Danish oil?

Danish oil is a wood finishing oil, often made of tung oil or polymerized linseed oil. Because there is no defined formulation, its composition varies among manufacturers. Danish oil is a hard drying oil, meaning it can polymerize into a solid form when it reacts with oxygen in the atmosphere.

What does lye do to white oak?

A driftwood lye pretreatment will give oak a light white and gray color to make it look like—you guessed it—driftwood. After you’ve decided on the effect you want to achieve in the hardwood floor and determined the correct pretreatment to use, it’s time to apply the pretreatment to the floor.

What does Lye do to white oak?

What does Lye do to wood?

Wood Lye is used for priming of unfinished or newly sanded interior woodwork i.e. floor, stairs, furniture and panels. The priming minimises the wood from yellowing and enhances the wood grain, creating a coloured wash effect, depending on the chosen colour. Wood Lye may be used on all types of wood.