How much boost can a RB20DET handle?

the stock RB20 is good for about 20psi of boost..

What turbo is on a RB20DET?

The stock RB20DET turbocharger is a tiny, T3 framed baby. Due to its ceramic turbine wheel and small size, the stock turbocharger begins producing useable boost very low in the RPM range on a stock RB20DET engine.

How much HP does a stock RB20DET have?

The RB20P, with 12 valves and a single-cam design, is the only one to use liquefied petroleum gas (LPG). It gets 93 HP at 5,600 RPM. The RB20DET-R produces 207 HP at 6,400 RPM.

How much psi can a stock RB25DET handle?

Stock turbo can do max of . 85 bar, which depending on supporting mods and remap will get you about 320-330bhp. Stock engine…. Some say no more then 400, others have done 450.

How reliable are RB20DET?

Re: RB20 reliability (AR31TU) They’re as realiable as any other engine Nissan has produced. Provided it’s been maintained. You also have to remember that the RB20 is a fairly old engine so any reliability issues you have heard are probably mostly due to age and some importers bringing in crap engines.

What size is the stock rb25 Turbo?

The RB25DET turbocharger employs a 60mm compressor inlet and a 38mm discharge nozzle. The compressor housing is identified with a 0.40 A/R. On the exhaust side, the turbine inlet passage is 65 x 45mm and the mounting flange measures 110 x 70mm.

How much power can a stock rb25 neo handle?

The NEO engine will run 500hp in totally stock trim, so do that – then figure out what you need next.

Is the RB25 Turbo the same as the TD06?

Non Shootout Dyno, whatever that ends up equating to. Dynod to 7,400rev limit, these days using an 8,300rpm rev limt …also, its interesting to see that the RB25 turbo is only making the same power as the TD06 at 80km/h, but from their on the TD06 walks away making more power

Is there a dyno for Dr drifts RB20?

ALL those people who have dynoed their rb on Dr Drifts new dyno should put their runs up too – i know there already have been heaps despite the dyno only being 1 week old! Everything else you can think of….STOCK.

Is the R34 GTT highflow Turbo good or bad?

208.8rwkw at 16.5psi. However, the stock actuator on the R34 GTT highflow turbo is only rated at 7pounds (i think) so it can’t hold boost properly and it spikes badly to almost 19psi. On cold days (low ambient temps) it spikes even worse so i’m looking at changing to a HKS GTRS pretty soon. or as soon as funds allow.

What’s the dyno on a HKS 2510 Turbo?

HKS 2510 turbo, 1.3bar currently running about 190rwkw due to conservative tune (random knock on PFC hand controller) HKS 2510 turbo, 1.3bar currently running about 190rwkw due to conservative tune (random knock on PFC hand controller) I had mine dynoed again on Dr Drifts brand new dyno on friday night…. 208.8rwkw at 16.5psi.