What kind of oil does a 2012 Prius V take?
What kind of oil does a 2012 Prius V take?
Engine Oil
| Viscosity: | 0W-20 (All TEMPS) 0W-20 is the best choice for good fuel economy and starting in cold weather. If 0W-20 is not available 5W-20 may be used. However, it must be replaced with 0W-20 at the next oil change. |
|---|---|
| Capacity: | 4.4 quarts (with filter)After refill check oil level. |
| Torque: | 27 ft/lbs (Oil Drain Plug) |
How often does a 2012 Prius need an oil change?
Recommended Oil Change Intervals for Toyota Vehicles However, as engine technology has advanced and grew more efficient, this is no longer the case. Toyota recommends that customers change the oil in their vehicle, or have it changed for them by a professional every 6 months or 5,000 miles, whichever comes first.
Does Prius V need synthetic oil?
Synthetic engine oil 0W20 required in 2010-2017 model year Prius v models.
What kind of oil change does a Prius need?
*Some model year Prius may have Synthetic Oil and only require an oil and filter change every 10,000 miles or 12 months.
How long do Prius engines last?
With regular maintenance, a Toyota Prius owner can expect to get between 200,000 and 250,000 miles out of their Prius, with some owners topping the 300,000-mile mark and going strong. As the first mass-produced hybrid vehicle, the Prius has an established history of reliable service for more than two decades.
What oil is best for high mileage Prius?
Don’t use high mileage oil. Next, make sure you check the necessary oil weight in your owners manual. A prius should use 0w-20 not 5w-30. Double check the manual.
What is the best oil for Toyota Prius 2010?
The 2010 Toyota Prius oil capacity is 4.4 quarts (4.2 liters). The recommended oil type is the Toyota Genuine Motor Oil or equivalent to satisfy the ILSAC multigrade engine oil grade and SAE 0W-20 viscosity.
How do you turn off the maintenance required light on a Prius V?
Turn the vehicle completely off. Press and hold the “Trip” or “MPH” button. Continue to hold the “Trip” or “MPH” button while switching the ignition to “On” without starting the engine. Release the button when the trip meter is set to all zeros.
