What breaker will interchange with ite?

Luckily, Siemens makes new circuit breakers that can replace the old ITE breakers. The new Siemens breakers will either have the same ITE part number, or its own Siemens part number.

Are Eaton and ITE breakers interchangeable?

Eaton’s UL classified breakers are designed and tested to be both mechanically and electrically interchangeable with circuit breakers manufactured by General Electric, Thomas & Betts, ITE/Siemens, Murray, Crouse-Hinds, and Square D.

What is a ITE breaker?

The name I.T.E. in itself represents the origin of the modern, resettable circuit breaker. I.T.E. actually stands for Inverse Time Element. This is the heart of every overcurrent trip device. When a fault occurs, it causes the breaker to trip faster as the rise in current increases.

Are ITE circuit breakers safe?

ITE Pushmatic electrical panels and circuit breakers do not have any proven design flaws that can cause a fire or shock hazard, but they are obsolete. Over time, the connection from the circuit breaker becomes loose, causing arcing and heat build-up on the buss bar.

What brand replaces Gould breakers?

Siemens
Gould products are now obsolete and the brand name has been carried over by Siemens.

What breaker is compatible with Gould?

Since Gould is no longer made under that name, I’ve gone internet searching, and it appears that Siemens Type QP is a suitable replacement.

How old are Pushmatic breakers?

Pushmatic electric panels were manufactured from the 1950s through 1980 and are now considered obsolete and potentially unsafe. The Pushmatic panel board and Pushmatic Bulldog circuit breaker were widely-used circuit breaker panels installed in properties that were built between the mid-1950s and early 1980s.

Who makes Gould circuit breakers?

Gould ITE – Heritage brand — ABB Group.

Who bought Gould?

In 1985, Gould, Inc. employed 21,000 worldwide and had sales of 1.4 billion, most of which came from its electrical and electronics products and components, and its defense systems. Gould’s non-defense businesses were acquired in 1988 by Nippon Mining (now JX Holdings).

What Breakers fit ITE panels?

ABB Breakers. The Asea Brown Boveri company stocks breakers compatible with ITE panels for industrial applications. These are large breakers for industrial power systems, and have a voltage rating anywhere from 200 to 600 volts.

Which circuit breakers are interchangeable?

Interchangeable Breaker for BR, MP, HOM, Q, & THQ. Interchangeable group will fit most General Electric, General Switch, ITE, Murray, American Switch, Westinghouse Type BR and Bryant.

How do you replace a circuit breaker?

Here’s how to replace your circuit breaker: Shut off the branch circuit breakers one at a time. Shut off the main circuit breaker. Test all the wires with a voltage tester to make sure they’re dead before proceeding. Remove the panel cover. Disconnect the wire of the breaker you’re removing from the load terminal.

What is an ITE circuit breaker?

ITE circuit breakers were the first low and medium voltage variety. Strong and robust, industrial ITE circuit breakers incorporate cutting edge design and are built to handle the rigorous electrical needs of large businesses, industrial plants, and manufacturing facilities.