What is LON wire?

LonWorks (local operating network) is a networking platform specifically created to address the needs of control applications. The platform is built on a protocol created by Echelon Corporation for networking devices over media such as twisted pair, powerlines, fiber optics, and RF.

What is LonWorks cable?

EM LO-NC-HP/F(eco-material, heat-proof cable) LonWorks® is an open network technology developed by Echelon Corporation. It enables the shift from centralized to open control, reduces the wiring required for various network systems, such as building automation, and simplifies network modifications.

What FTT 10?

The FTT-10A transceiver consists of an isolation transformer that is integrated with a 78kbps differential Manchester coded communication transceiver. Pins are provided for connection to the Neuron Chip Communications Port (CP) and clock lines, +5V power, and the twisted pair network.

What is unique about a LonWorks control network?

LonWorks is a peer-to-peer network, meaning there is no single master on the network. Control devices are free to communicate directly with each other, avoiding some of the problems that can occur if a single master fails. LonWorks, on the other hand, has over 170 different data types.

Is LonWorks an open protocol?

The protocol is proprietary, and not truly open to the public. Only actual members, mostly manufacturers are included in standard development(s). Extensions within Lonworks are allowable only through the LonMark Consortium. Hardware specific, and requires the Neuron chip for network movement of the protocol.

Is LonWorks dead?

So, LonWorks is not going away because some manufacturers are designing LonWorks components into their product line, and it is very costly to change later on.

What is level 4 cable?

Category 4 cable (Cat 4) is a cable that consists of eight copper wires arranged in four unshielded twisted pairs (UTP) supporting signals up to 20 MHz. It is used in telephone networks which can transmit voice and data up to 16 Mbit/s.

Is Lon open protocol?

BACnet is a nonproprietary, open protocol communications standard. It can be applied to practically any type of system found in buildings today, including HVAC, lighting, life safety, access control, transportation and maintenance. By design, it can use a wide range of network technologies for communications.

What is the difference between Modbus and BACnet?

Modbus: Modbus is a network protocol best used for industrial automation systems specifically for connecting electronic equipment….by Nikko Phongchit.

	Use
BACnet	Communication across devices
Modbus	Connection between devices
LonWorks	Networking devices through power lines, fiber optics, and other media